Speedfight Engine swap 100

Discussion in 'Newbie Scooter Tuning' started by xXRipleyXX, Mar 17, 2020.

  1. xXRipleyXX

    xXRipleyXX New Member

    Messages:
    8
    What engines (if any) will fit the 100?

    got a seized engine, was just going to put a big bore kit on, once i've stripped the engine ect, or replace it with a 125 engine.

    Anyone know of any engine swaps?
    What 125cc or bigger engines would fit?
    Would a speedfight 3 or 4 engine fit?

    Any advice will be greatly appreciated
     
    Last edited: Mar 17, 2020
  2. milo2025

    milo2025 Trip to Trumpton

    Messages:
    727
    It's not advisable (don't know about sf3/4 though). I had a sf2 100 for a bit and it was a good laugh, but she kept breaking down in the rain so one of us had to go - it was me or her. It'd be easier swapping for same engine if you can find one & fitting the big bore kit, or stripping and fixing the existing lump. Check out this thread.
    https://www.scootershack.co.uk/thre...ilera-engine-in-a-speedfight-100-frame.27012/
     
    Last edited: Mar 20, 2020
  3. xXRipleyXX

    xXRipleyXX New Member

    Messages:
    8
    thank you, appreciate your advice
     
  4. scubabiker

    scubabiker NITROJUNKIE

    Messages:
    7,321
    Cool profile pic.... You should see my V4 Honda... I think you will like it
     
  5. scubabiker

    scubabiker NITROJUNKIE

    Messages:
    7,321
  6. milo2025

    milo2025 Trip to Trumpton

    Messages:
    727
    NINTCHDBPICT000137308685-e1575938851455.jpg
    Reminds me of the Hoff vehicle from Knight Rider. That was a truly awesome car, or so I thought when I was a kid. :cool:
     
    Last edited: Mar 20, 2020
  7. milo2025

    milo2025 Trip to Trumpton

    Messages:
    727
    Last edited: Mar 20, 2020
  8. scubabiker

    scubabiker NITROJUNKIE

    Messages:
    7,321
    It's the V8 interceptor from Mad Max. A ford XB falcon to be exact. MFP is the fictional police force in it. My bike is a tribute to the other police cars from it.
     
  9. scubabiker

    scubabiker NITROJUNKIE

    Messages:
    7,321
    And Kitt was a trans am. Not too different from my Camaro actually....
     
    milo2025 likes this.
  10. xXRipleyXX

    xXRipleyXX New Member

    Messages:
    8
    Awesome paint job, definitely looks like part of the mad max crew
     
    scubabiker likes this.
  11. Stevep

    Stevep Well-Known Member

    Messages:
    5,895
    The Honda DN-01
    681cc iirc
    released 2008
    dis-continued 2010
    over priced, under powered

    I liked the look of it, but lack of storage capacity, lack of power did it for me
    Needed a bigger engine, certainly a 1200cc jobbie, probably could have overtook the ST1100 if givi had made luggage for it as well
     

Share This Page