Firstly I would like to say Hello to everyone on this forum and say thanks to the admin for letting me use there site. I got a yamaha slider form a kid on gumtree last year and it was an utter wreck, the main bearings where shot to sh*t and rollers where f'ed all the fairings where knakared it really was f'ed so ive started a project with it. I was thinking to just bring it back to stock and sell it but this was not the case Ive gone stage 6 all the way so far and im still not done, im looking into getting the BDC fairing kit for it as well as a doppler rear bar but cant seem to find them anywhere im not sure if there even still being made, if anyone does know where i can get one from please let me know. I didnt take any pictures before starting but here is a list of where I am at the moment: Stage6 C4 Crankshaft Bearings/ Oil Seals Kit Full Engine Gasket Set Stage6 Exhaust Gasket M6 Exhaust Nut And Bolt Set STR8 Cooling Fan Cover Yamaha BW's / Slider white STR8 Fan Spoiler Cover universal white Cylinder Cover Yamaha BW's / Slider white Toxik Cylinder Stud Bolts M6x109mm Easyboost Starter Motor Cover Stator and flywheel for Minarelli Polini floating brake disc Stage6 Sport PRO MKII 70cc Barrel Kit CDI, Unlimited/ Derestricted Clutch Stage6 Torque Control MKII (107mm) Stage6 Torque Control Clutch Springs Clutch Bell Stage6 R/T 107mm (433g version) Stage6 R/T Oversize Variator,Transmission Kit Rear Brake Shoes Stage6 Sport S10 Brake Pads Stage6 Torque Spring Stage6 Intake System Kit Universal Fast Flow Fuel Filter Stage6 High-Quality Fuel Hose Stage6 R/T Mk II PWK Racing Carburettor 24mm 90 Degree Universal Tubeless Tyre Valve Stage6 CNC Quick Action Throttle Kit Motoforce Racing Ignition Coil (High Voltage) Arrow Extreme pipe This is all ive got so far only because of money but I will update as and when I get more bits done to the ped but for now heres some pics for you to spunk over hahah
Thanks man, I cant wait to get it on the road, I'm hoping it will be done by the end or march start of april but will keep everyone updated on the progress
Small update Ive put the pipe on the engine this morning as I was bored and had nothing to do lol, I've also painted one of the wheels gloss black.
you should see the wheels on my scoot, i didnt prepare them or anything, just sprayed them matt black. im not a perfectionist at all...
Ive a Slider too, was my first ever bike, went to work most days whilst i was in school and paid for it myself along with a cbt. I do hope you enjoy your Slider too !
Not my first this, I had a chinese bike first (never again), then a Yamaha RXS 100 (the best bike ive owned) apart from my Thundercat YZF600R, I loved that but never had my licence went out on it got done by old bill and got ten points, now am stuck to a cbt until there gone of my licence so I got the slider but lol its gonna be pulling about 25hp+ once im done with it loooool But thanks Tom
Ah i see, well i'll be looking forward to the build of your Slider. It may inspire me to get mine back on the road! And we have all done the stupid stuff, least you are going legit now better late than never.
i was thinking the same... maybe out of over 100cc it would be possible, running total loss ignition and E85 or another high octane race fuel
Well the barrel out the box does 17hp, I'm going to be blue printing the cases I've got stage 6 oversize tranni kit the pipe will give me say 2-3hp also the 24mm flat side carb, guys have a look of what ive done so far theres more to come, I will get it dynod at some point to show you guys im not bullshitting.
you thinking avgas? you dont need to modify the piston or squish for avgas, can run it just like petrol. those HP figures are at the crank i beleive, but i could be wrong. i feel that a 24mm carb could be a little overbig, whats the area of the reed opening? and the angle of the reed opening?