will this work well ???

hi im new to all this. so just wondering if this will work well .
bascially i already have these parts in my aerox 50 .
. pm tuning 70
. primary and secondary gear up
. standard carb, ignition, and crank
. polini vario, polini contra spring
. pm tuning clutch
. stage 6 vforce 3 reed block, pm tuning boost bottle
. yasuni r exhaust

and wanted to put these parts on it or swap for some existing parts
.polini 70 evo2, tnt 21mm carb , doppler ignition, doppler enduro crank, leo vince stainless steel 70 exhaust ( as im pissed off with rusting) , will these parts work together cheers

Leovince on a evo2 will be stupid. Buy some vht paint and paint your exhaust lol you could do with a 25mm on a evo if i'm right... tnt carb are cheap and crapy too.

I think by leo vince stainless he means the GP. I have nothing to say other than lol!

who are u replying to? as i mean the leo vince 70 exhaust that needs a min of 10.500 rpms and is rated race-evo and is 250 quid . i dont mean the gp exhaust thats shit

Leo vince don't make an exhaust that even comes close to working with a polini evo kit.

wat about this then ....http://www.sip-scootershop.com/EN/Products/L4067/Racing+Exhaust+LEOVINCE+Hand.aspx

Uper-Class exhaust for useage with a 70cc SPORT-RACE Cylinder such as MALOSSI MHR Recplica/HEBO Manston Replica etc.

Doesn't mean it's actually any good with those kits however. Much better exhaust for them is the Yasuni C16.

So as I said it's a terrible exhaust for an evo kit.

It's basically a really expensive and glorified ZX, max RPM's of 10500 puts it firmly in the sport category, not even midrace.

Wouldn't catch me paying that for a leo-vince hock: :blink: Rather a Yasuni in my opinion.

drop one of the gear kits for the min, you probably have gearing for 90+mph and your NEVER gonna get that wiht your spec.. would be alot faster accell and top end wiht a single 30% gear set (unless you somehow have a 10% and a 15% in there or something) as said a 21mm carb is a bit of a waste.. polini use a 19 or 21 on there race engines, but not there sprint engines LOL serious ammount of power to be gained from a bigger carb on an evo.. there thirsty fuckers tho so keep in mind the thing will drink, even wiht the stock carb

as for a dopler enduro crank.... behave lol need something heafty for the evo.. bgm/polini are about all id ever use wiht an evo/so on.. as for the pipe,. need a c21/c30/rs1400 or one of the o so sexy roost pipes ive been promising myselkf for nye on 6 years