Reed Block

Discussion in 'Scooter Tuning' started by alex300k, Nov 22, 2008.

  1. NJH

    NJH New Member

    Messages:
    489
    a £200 dyno isnt very expensive isit reli lmao
     
  2. Crana

    Crana Active Member

    Messages:
    1,056
    Dyno speed is different face it its slow
     
  3. NJH

    NJH New Member

    Messages:
    489
    if you'd managed to set your bike to go 73mph, you wouldnt be asking a question about a reed block, cus ud have to be pretty fukin good to get it runnin that well mate
     
  4. pimped_aerox2

    pimped_aerox2 New Member

    Messages:
    192
    thats the thing he didnt set the bike up to do wateva speed it does he just bought it off sumone who did lol
     
  5. waxhead

    waxhead Member

    Messages:
    594
    Regarding reeds and not the stupid fucking conversation thats going on

    I use the v-force reed
    the reason i do this is because the v-force is quicker responding on the 2nd opening stage this giving it more torque

    It a little known fact that when the piston hits bdc and the pressure has gone from the lower cases , the pipe is still pulling more air mixture into the engine. this cause the reed to open and allow more air flow
    because the v-force has a lesser angle to open to allow full airflow it responds quicker and so gives more in this stage
    Also because the angle is less they can close quicker as well and are less prone to reed flutter
     
  6. capri dave

    capri dave Active Member

    Messages:
    5,076
    ive got the stage 6 v-force reeds on my runner 70...

    i noticed an improvement in performance as soon as i fitted it, and that was over the polini evo reed block i had in before hand...

    i didnt really mention it on here as people were actively saying the stage 6 v-force reeds are a load of crap and not worth fitting unless you were running a ported evo and massive carb :pimp:

    so i kept it my little secret...oh well ive got 1 or 2 more secrets yet ;)

    But yeahh cant fault the v-force reeds really...


    [​IMG]
     
  7. alex300k

    alex300k New Member

    Messages:
    29
    right thanks for the advise on carbs which is the reason for my thread
    yes my speedfight went 64 mph on a slight slope i got clocked by pimped aeroxs 2 dad in audi im selling it because my stage 6 sport fucked up becuase i got a pice of metal in it and now with standard 50 it dont start
    i got this aerox of one of my mates yes and he used to beat my speedfight
    he did do the setup but he didnt have a decent reed block
    look im not just trying to argue minor confusion its just every thread i do and everythink about my bike you just have something bad to say just cause you dont like my mates threads dont just write negativitie about mine and theres were asking for advice and i thoguth thts what your supposed to give well my speedo says 73 and it beats over aeroxes tht go 67 so thts good anoth for me if your not happy with tht then sorry but is all i come on here for is for advise and some people just cant do tht can
    thanks to all the people tht write a posituve coment n gave advise
     
  8. MiNoR cOnFuSiOn

    MiNoR cOnFuSiOn Administrator Staff Member

    Messages:
    14,276
    Rides:
    et2 monster
    you thought wrong... i dont HAVE to give you anything.. your here on our website.. chatting nonsence about your bike... dont want bullshit? dont write bullshit in your sig..

    where do people get this @the internet is feree for everyone so everyone has to help everyone@ attitude?

    as for your bike.. try getting a clue, reading up a bit.. instead of asking the sqame questions EVERY FUCKING AEROX owner in the world has ALREADY asked this week, and last week, and the week befor

    its got fuck all to do with who your friends are, your obviously all retarded. as for your question, its been answerd many times, including my second post.. so ye.. dont like me then fuck off, i own the place..

    just to add, i simply said it doesent do what you think it does, i couldent care less what you were clocked in as your bike CANT defy physics.. no ammount of "my m8 in this, my m8's dad in that" is gonna convince me of somthing math's can prove wrong..
    as for everyone else jumping on the bandwagon (as fucking usual) can i say anything wihtout 20 people joining in? it was a lil comment thats been thrown out of proportion.. in short, theres fuck all need for a reedblock in your bike, yours is OVERSIZED for the cylinder your running ether way.. just get diff reeds (if you havent already) oh and stop dreaming about going 73... if it go's 73 jump on a motorway and see if you keep up with the slow lane, fucking chavs wiht aerox's DREAMING of top speed is the worst thing in the world.. u know how many fucking aerox owners have cought up to me at lights and said "wow m8, is that a 70? how did you get it to do 100" :confused:
     
  9. MiNoR cOnFuSiOn

    MiNoR cOnFuSiOn Administrator Staff Member

    Messages:
    14,276
    Rides:
    et2 monster
    u know what, fuck this.. your an idiot.. i gave you advice as did alot of other people (about 2 pages back) an you seem to want to make a point of me saying your speed's wrong.. look, clkock speed is 30% out!!

    oh and so are you.. come on here with that attitude? "your all have to help me if i ask" fuck off to tag/petrol
     
  10. capri dave

    capri dave Active Member

    Messages:
    5,076
    yeahh i own a speedfight as well...you can get some crazy speeds on the clock,

    i used to regularly see 60+ with a crappy airsal 70 kit and a kundo pipe...

    but im afraid its only clock speed, you gotta knock atleast 10mph off for genuine speed ;)

    you think thats bad, gilera runners are worse, i may as well trade my speedo in for a sun dial on my runner :p
     
  11. eddiesmith

    eddiesmith Member

    Messages:
    212
    lol ye the speedos are awful on an aerox!! on a flat my needle points at the red oil light, with is off the clock and proportional to about 70 lol i gps' it just to see and its really only 54.3mph :D lol
     
  12. capri dave

    capri dave Active Member

    Messages:
    5,076
    finally a post on clock speed...talking sense ;)
     

Share This Page