Gilera runner 50cc setup

Discussion in 'Scooter Tuning' started by SickBrains, May 15, 2017.

  1. SickBrains

    SickBrains New Member

    Messages:
    1
    Hey,

    I want a wheelie setup, you can see enough 50cc on yt pulling wheelies but I just cant. its probably because of my setup.
    it goes up to 85 km/h on GPS acceleration is good up to 70
    My current setup:
    Polini Hi speed vario
    purple malossi big spring (I dont know the name but in dutch its drukveer)
    purple 3 small springs
    stock rollers (Tried 5,3 but didnt work out)
    50cc
    Sito plus exhaust


    (I have a 70cc lying around but my electrical restrictor wont work on it, and you are fucked if you get caught in the netherlands)
     
  2. Stevep

    Stevep Well-Known Member

    Messages:
    5,895
    Your not the only one in the netherlands that is on here;), we already know about there dislike of fast scooters and anything that is too fast for fun.
    Realistically, you have to keep your bike as standard as possible in order to keep it from being seized and crushed, so the only real advice I can offer is learn how to pull the front up with your arms.
    Once you master this, you will be able to wheelie anything of any power.

    A 70 kit with 50cc markings on the barrel would be good if you could get your hands on one, or have your own bored out to 47mm (thats 70cc).
    But if the local fuzz decide to take the head off and inspect it, your screwed.

    You could always move countries I suppose.................
     

Share This Page