Building a stage6 50cc any help appreciated

Discussion in 'Comments / Feedback / Suggestions' started by JamesD31, Nov 21, 2019.

  1. JamesD31

    JamesD31 New Member

    Hi I’m new to this forum and mopeds. I’m looking for knowledge and any information that any of you’s may be able to offer, so it’s an imola motobi 50cc. I’ve got so far a stage6 crankshaft and bearings, stage6 sport/pro mk2 cylinder kit, a stage6 variator and drive belt, stage6 torque control clutch and clutch bell. Stage6 medium clutch springs, I’m going to get a 21mm carb, Yasuni c16 carrera exhaust and a stage6 throttle. Is there anything else I should be looking at and any guidance would be greatly appreciated.
  2. milo2025

    milo2025 Trip to Trumpton

    Sounds like you have a good set up there. You got to make sure you get the jetting right and it's not running too rich or too lean. Plenty of patience and a bit of trial and error required. If you're new to mopeds I'm impressed by your first build. Keep us updated. Good time of year to do it, so it's ready for spring/summer.
    Last edited: Nov 21, 2019

Share This Page