a week away with the dremmel

Discussion in 'General Tuning' started by shiny red, Dec 27, 2008.

Page 6 of 7
  1. james

    james Member

    Messages:
    436
    Yeah we no that seen a few people crash or come off there scooters in the last few weeks with this freezing weather we have been having.

    Deffo not good for riding scooters or any bike come to think about it wet and icey roads everyware...not good!


    Good luck with the barrel lads hope it turns out better than the last one.
     
    james, Jan 7, 2009
    #101
  2. MiNoR cOnFuSiOn

    MiNoR cOnFuSiOn Administrator Staff Member

    Messages:
    14,276
    Rides:
    et2 monster
    fuck off ive got a heated workshop 20 poeople could hapiuly work on there bikes in LOL

    aint the carb i dont think... pointing to flywheel tbh.. clutch is not helping but back together (somhow) and im seriously in need of a schmoke. tis the best wether to ride in, shame the bikes not agreeing atm (usually love my cold dry ride home :confused:)
     
    MiNoR cOnFuSiOn, Jan 7, 2009
    #102
  3. kyle1b1

    kyle1b1 New Member

    Messages:
    5,191
    i would actually love a workshop even a shed or garage

    all i got is my back garden. freezing and dark.

    only light is the security ones with sensors so when go out have to dance infront of them to come back on :rofl:
     
    kyle1b1, Jan 7, 2009
    #103
  4. MiNoR cOnFuSiOn

    MiNoR cOnFuSiOn Administrator Staff Member

    Messages:
    14,276
    Rides:
    et2 monster
    go get a job somwhere with a worekshop... worked for me LOL (even got a computer here see) LOL kitchen, shower, all i need is a bed and id live here
     
    MiNoR cOnFuSiOn, Jan 7, 2009
    #104
  5. RY4N172

    RY4N172 New Member

    Messages:
    3,235
    i have a garage , its TOOO COLD! :wtf:
     
    RY4N172, Jan 7, 2009
    #105
  6. kyle1b1

    kyle1b1 New Member

    Messages:
    5,191
    i did at one point. with also a comp and heating

    but went tits up
     
    kyle1b1, Jan 7, 2009
    #106
  7. MiNoR cOnFuSiOn

    MiNoR cOnFuSiOn Administrator Staff Member

    Messages:
    14,276
    Rides:
    et2 monster
    you were shit, you got fired

    back on topic LOL
     
    MiNoR cOnFuSiOn, Jan 7, 2009
    #107
  8. kyle1b1

    kyle1b1 New Member

    Messages:
    5,191
    Actually :w00t:

    i was good worker just didnt behave and mouthy
    everytime i go to the garage hes dropping hints for me to go back.

    think i might have too.

    right we can go back on topic now :rofl:
     
    kyle1b1, Jan 7, 2009
    #108
  9. shiny red

    shiny red New Member

    Messages:
    1,224
    port map we used on mine and i will use again on the new barrel :D thanks minor :beer:
    [​IMG]
     
    shiny red, Jan 7, 2009
    #109
  10. MiNoR cOnFuSiOn

    MiNoR cOnFuSiOn Administrator Staff Member

    Messages:
    14,276
    Rides:
    et2 monster
    would show my new one but didnt take a rubbing... was going well half the way home (when it would actually clear what it was doing) ether fueling or ignition related but the piston i belive is now in a few bits (literally left the bike at al's house and come home, sick of the fucking thing... i just want to build it nice an slow and properly for ONCE)
     
    MiNoR cOnFuSiOn, Jan 7, 2009
    #110
  11. shiny red

    shiny red New Member

    Messages:
    1,224
    waiting for bearings did not help shit ones as well :rtfm:
     
    shiny red, Jan 7, 2009
    #111
  12. seanwhite06

    seanwhite06 New Member

    Messages:
    358
    Rides:
    runner 172, zx6r
    lol

    how weird! :msn1: ive just spent the last few days laying near enough the exact same map as that onto a 125 barrel just to practice porting/ see how it goes!! :D

    corsa map but with the 125 dimensions though! or close enough anyways! :D

    least i no it should go well!! :pimp:
     
    seanwhite06, Jan 7, 2009
    #112
  13. MiNoR cOnFuSiOn

    MiNoR cOnFuSiOn Administrator Staff Member

    Messages:
    14,276
    Rides:
    et2 monster
    piston will fall into the port.. reduce the width on the map by the reduction in piston diameter.
     
    MiNoR cOnFuSiOn, Jan 7, 2009
    #113
  14. seanwhite06

    seanwhite06 New Member

    Messages:
    358
    Rides:
    runner 172, zx6r
    lol

    48 flat
    42.5 measuered the correct way
    77% of bore! ;)
     
    seanwhite06, Jan 7, 2009
    #114
  15. MiNoR cOnFuSiOn

    MiNoR cOnFuSiOn Administrator Staff Member

    Messages:
    14,276
    Rides:
    et2 monster
    well well well somones paying atention.. get a thread up with some pics already
     
    MiNoR cOnFuSiOn, Jan 7, 2009
    #115
  16. WOLFFY

    WOLFFY New Member

    Messages:
    4,135
    Rides:
    Runner 172
    I really can't understand port timings/sizes :(
    Could you quickly give me a low down on how it works minor??
    plzzzzzzzzz :D :D
     
    WOLFFY, Jan 8, 2009
    #116
  17. Dec

    Dec Active Member

    Messages:
    3,183
    Rides:
    nothing ugm
    lol u cant learn that shit u have to be born a 2t tuner :p


    just like me
     
    Dec, Jan 8, 2009
    #117
  18. WOLFFY

    WOLFFY New Member

    Messages:
    4,135
    Rides:
    Runner 172
    you keep telling your self that dec
     
    WOLFFY, Jan 8, 2009
    #118
  19. Dec

    Dec Active Member

    Messages:
    3,183
    Rides:
    nothing ugm
    dont make me quote the sad face one million times so terro has to lock the forum
     
    Dec, Jan 8, 2009
    #119
  20. WOLFFY

    WOLFFY New Member

    Messages:
    4,135
    Rides:
    Runner 172
    k :( :( :( :( :( :( :(
     
    WOLFFY, Jan 8, 2009
    #120
Page 6 of 7

Share This Page