The UK's biggest automatic scooter forum.
Separate names with a comma.
As In Title, Does Anybody Know What Size Filter I'd Need To Fit A 21mm Malossi Carb?
Really? Somethings Set Up Wrong Somwhere... My Aerox With Setup Below Has Touched 74mph On dyno Figures, And 71 Being followed by a someone on an...
They Sound A Little Light For A Variator Kit.. Mines Running 4.5g, Id Try Slightly Harder Springs, And 0.5 Heavier Rollers?
A Friend Is A 2-Stroke Specialist, It's His Job, Just Wondered What You'd Think To Match :)
with my 17.5 carb i use a 98 jet... and before i upgraded to a malossi variator, i used 2.5g rollers to get it to stay in the revs.. :)
My Aerox's Oil Pump Packed Up Last Week And Killed The Crank, Has Been Changed And Everything Put Back Together, But Now Running PreMix.. It Ticks...
Stage6 Crank Or Polini Race
Pm Tuning Barrel Uses Standard Crank Size i Think.. And You Can Buy A PM Tuning Crank. They're Cheap.. But Id Spend A Little More Money And Buy A...
A Combination Of Stage6 Torque Control MKII Clutch And Matching Bell, You Can Adjust Without Removing The Bell :D Suuuper Easy, Just A Pricey...
Malossi Is Twin Ring If Im Not Mistaken And The Polini Isnt? Malossi Will be More Reliable, Mine Has Done 4000 Miles At 11,500 Rpm Everywhere.. :)...
Holding It Flat And The Revs Go Up, Then Sink And Slowly Pick Up Again Is The Rollers Being To Heavy.. If it only does it when you shut the...
Cheers, But I've Now Completely Changed My Mind To A Polini EvoII.. Any Crank Recommendations On That??
Am Planning On Doing A Complete Overhaul On My Aerox. I'm Wanting An MHR Rep Cylinder Kit, And Am Thinking Of Putting In A Stage6 HPC Crank In, Is...
Tbh, We Sell Them Where i Work.. And They Aint Something You Want To Be Tuning.. If Its Doing 45mph It Has Been Derestricted.. If Your Wanting...
the 107mm, Standard Bell And The Clutch Is For A 107mm? I've Fitted A New Stage6 Clutch Bell And It Seems To Fit Okay. Only Trouble Now Is...
i Had A Simliar Problem Wouldnt Run Till Warm, Then Still Bog Till It Sounded Liek It "Cleared Itself". i Would Personally Clean The Carb Out And...
i Have An Stage6 Torque Control MKII Clutch, With Standard Bell, The Bell Doesnt Seem To Go Completely Onto The Clutch? There Is 1-1.5mm Of...
@The General, i have that combination on my aerox, and it ran slugish for ages, turned out the standard 12mm carb couldnt handle it, i fitted a...
i Also Forgot To Mention That i Have An Upgraded Torque Spring, Malossi One, its Yellow, i Dunno If Colour Means Anything?