The UK's biggest automatic scooter forum.
Separate names with a comma.
Do you know what rpm the stock torque spring is, I have not got the stock spring and have some different ones from 1000rpm , 1500rpm and 2000rpm...
The crank looks good and it's just the standard one, i will give it a blow out to get anything that's in there out. I am just fitting the kit and...
I bought this aerox with this kit already in and it was seized, he said I seized within one hour of assembling. I have ordered a stage6...
So you don't need to put ten to a certain torque
I am just going to replace all the stud, they only cost £5 for the 4. When I fit the new studs do I just screw them in as far as they go with...
[ATTACH] [ATTACH]
Hi everybody I have just bought a 2004 seized aerox for £130 to fix up I have remover the full cylinder and piston and have realised I am going...
From 3gram to 7 gram, 4 has been the best after 20mph as anything less it will rev to high and anything over it till be sluggish. So I think te...
It has nothing to do with carb set up or anything else, I have tried all different rollers an springs together and I have also tried every jet and...
I've had a problem with my aerox 70cc for quite a while now, when I set off it is very slow until I get up to 20 mph the it gets into the...
If you have polini open air filter you will need a jet in bigger than 75
I would buy a manual choke, I think it is very hard to get the jetting correct as you have to wait for the automatic choke to come off, I bought...
Put the 68 back in and see if it's better if not turn the tick over screw to give more revs to stop it cutting out, also before riding the bike...
Got some PTFE and still no look in thinks of crank problems maybe seal what would the symptoms be as I'm running standard crank on my set up
If you have not got access to a windy gun the buy a torque wrench they are not that expensive and work as they should, when you are jetting if...
Tighten the variator bolt to 33nm There is no problem with adding those parts so early as it is a much better variator and will have a much...
I will go and get some today and let you know what it rides like later on today Thanks
Thank you for all your help il lubricate them parts and then go from there Thanks again
Yes it does feel like it's stuck in the wrong gear so do you think it could be just in need of a bit of grease
Thank a lot for your help il get some grease, but back to the really bad acceleration do you think it is my clutch engaging to early
