The UK's biggest automatic scooter forum.
Separate names with a comma.
You can remove the caliper with the rim on through the hole on the rim, its really tight but it gets through.
Let me tell you straight away its your crankshaft, i guarantee you 100% its the crankshaft either change it or get it off and get it to be...
You need to open the hole where it intakes air according to your carb area.
Yea looks like its replacment for the stock vario, little bit better drive face.
You cant see it like that because firstly you have no clue how it works, every bike / scooter will require different jetting you buy sets and u...
Yea its not your take off will never be like it should because the mhr overrange is designed for higher hp scooters, so it doesnt have that hole...
Try dropping it one more even richer then get the mixture screw perfect, the yasuni looks nice on it :)
Hmm i would say check the torque drive travel if it opens to max, but if u havent changed clutch bell or clutch there should be no problems there,...
I have no comment maybe try reading what i typed again and think more deeply (if you are capable)...........
I cant know if that is perfect u need to warm up your scooter(operating temp), then play with the mixture screw and you need to listen to your...
Ok pro tuner then tune it ;)
???????? Because it will make more hp at higher rpm lmao, ofc you will need to re jet your carb and tune your cvt, thats the most basic stuff.
Its not possible to tell you how much it has to be turned out.
The motard is piaggio AC so i would suggest BR9ES, as for jetting you need to check what carb does it have and what jets and from there, also for...
As i have heard the technigas exhauts barelly give little more performance than a stock exhaust, up your jet by at least 10 numbers for start then...
If u get longer belt u have less travel in the torque drive and that is less top speed, you need aftermarket variator the stock variator can never...
Try raising the needle also make sure you got your mixture screw perfect, when you get it perfect then you can really feel how the scooter rips.
It takes second because of too fat needle or too heavy rollers, i would suggest getting a polini hi-speed vario. Its far better quality than the...
Put then mount them try them, if too soft add more oil etc...
The malossi redsponge lets little more air than the standard sponge, have you modified your airbox for your carb?
