The UK's biggest automatic scooter forum.
Separate names with a comma.
I really like that !!!! tell me more about the brakes, how much better is it than oem ?
If you have been reading performance bikes lately they tunned a yam rs125 fitted the bigh bore kit carb Race cdi & exhaust exhaust and rolling...
I,m about to rebuild my front forks on my 2002 NRG I will post as i go along
looking Good fella ! i always had a soft spot for a Dragster it just looks so different !!! subscribed
I still haven't got around to fitting the HID kit as i think the stock light reflector will melt under the power of a 50w hid setup and the wiring...
The dremeling looks fantastic !!! What are you using to seal up the cases when you go through ? liquid metal jb weld ect.
£90 i got a full kit for the supermoto, so i had spare and i decided to put it to use !! :good:
The lights on my moped are shocking bad so i decided to up grade them 50w of 6000k hid light should make things better and me seen at night :-D...
if you look at tbe later photos you will see thst the barrel cover and fan cover have been fitted. i think my max will be 400, my supermoto...
I plan to sand down the panels and respray but i want it running right first. I worked in a bike shop so the Mot center guys know me pretty well,...
80% of a good paint job is prep work
So many hours later and loads of coffee [img] [img] [img] [img] [img] [img] I fresh fuel, 2 stroke and a new battery and it fired...
[img] [img] [img] [img] [img]
Hi all round two Base bike is a Piaggio Nrg MC3 a/c 2002 A mate give me it for free as he never used it so had it boxed up and lying at the...
New carb arived, went with a 19mm shall be fitted over the weekend so hopefully this solves my problem. :yahoo: [img] [img]
Re: Are you an older member? 30 here
Re: My Vespa stage6 RT 77cc project really looking forward to this Build to see what can be done with a small engined moped Get some ideas for...
firstly check for blown bulbs ? then check wiring then check switch gear A multi meter continuity with test is a must and usually on £4...
Found the stock settings for are carb rob set the mixture screw 2.5 turns out from being all the way in,the mixture screw is on the back of the...
o.k got the stock settings for my carb set the mixture screw 2.5 turns out from being all the way in,the mixture screw is on the back of the carb...
