The UK's biggest automatic scooter forum.
Separate names with a comma.
Ped parts were suppose to get back to me Friday have emailed them but still no reply
Normally with a 70cc kit and exhaust you will find that you tend to go a gram or gram and half lighter,but remember you can mix two sets of...
Still waiting on pedparts Edit Andy been back to me to say they have a different supplier so they are checking into it.
Why don't you upload it to youtube and post the link, that way some of the other members will see it and might have a idea on the problem
Ordered the dellorto pvha repair kit from ped parts they sent a motoforce one and completely different the needle is held solid with no movement...
Just a bit curious I have managed to get my nrg back together but when cleaning out the carb I noticed it only has 2 jets the main and the...
No problem best of luck
There will be a block connector that plugs into the back of your clocks heres some pics on the link if yours is the same it will be the green one...
as steve said wd40 also take the all the fairings off the bike especially the clock surround and spray every connector with a water or moisture...
good reply about the plasters lol
Its going to be a process of elimination,have you adjusted the mixture screw,not the tickover screw,check your air filter and check the auto choke...
Yes main jet is too small so running lean,piston starts heating up causing is to not moving freely in the barrel due to heat and expansion of the...
Got the wheel spinning on tickover stripped down the gearbox and clutch found there was a tablespoon of black oil in the gearbox and that is no...
Yes standard exhaust,will have a play about with the mixture screw, was just a bit worried as I haven't taken it out yet but noticed it take about...
Hi was just wondering as my second nrg which I have just put back together will post some pics and everything is standard apart from being...
Looking nice,been on the lookout for one of these myself,but all the ones I have seen need a fair bit of welding underneath as they have rotted
No replaced the gasket on the drain screw and the bowl also changed the fuel pipe.I think its time for a full rebuild as I get like a rubbing...
Yeah it is a chocolate brown but I also notice there I a strong smell of petrol if the bike is left standing.
Looking at the plug I would say its running really rich to the point its a very dark brown but if I try to drop down a size it starts spluttering
My nrg mc3 isn't running the best a little bit on the spluttering side,i decided to change the the jet and seen it has a 92 in it.The bike has a...
