The UK's biggest automatic scooter forum.
Separate names with a comma.
The front pulley and rollers are fine as I replaced the rollers like one month ago and made sure to clean everything. I didn't take appart the...
No one? :\
Still having issues with the CVT on my aerox. Now the problem is as following: If i start the bike after it's been off for a while everything is...
If it only happened after leaving the house then the engine was probably not yet properly heated up. Make sure you leave the bike running for...
Optimal roller weight is different in every bike and highly dependant on the setup it's running. Although if you want the stock weight ask around,...
If it has the stock rollers and contra spring, they're most likely really worn down (with 39k km what would you expect :P), so the first thing to...
It gives you better acceleration as you have more power and also a little bit more top speed as you can usually reach higher rpms than with a...
I too have this question, I've come across this but don't really like them... http://www.pedparts.co.uk/product/210/fairing-indicators-oval If...
Yes, if you changed the exhaust you should upjet, usually about 10%
As said, you should stick with the stock air filter and air box. Having an open filter with just those little modifications won't help you with...
Has the noise stopped? If so, it could be a carb problem, I'd bet on a clogged idle jet. Or it could be just a bad air/fuel mixture screw setting...
If it's getting worse then I'm guessing it needs down and not upjetting? Is 60 the default jet or did it have a smaller one beforfe you changed...
That's what I meant, sorry :D
That's true, gonna consider it. Thanks And now the scooter is behaving like it has too heavy weighs again. what the actual f*.
Only the pulley, not the crank? Well, it was the starter motor assy that was causing all the noise, it was completely worn out and the clutch...
the belt seems to be to high* on the front pulley, which tells us that the halves are too close. Didn't you forget to put a spacer (which usually...
As I said, that's what i thought, but everything seems good. Today I'm going to my friend's place, he has all necessary tools and knows a lot...
I did and both seem good to me. What worries me the most atm is the terrible rattling noise coming from the variator when I rev up (it stops at idle)
Found a store nearby selling these sliders, opened the variator with a friend's impact wrench, put the sliders, made sure everything was good, and...
So I cant remove the pulleys atm (I used to work in the bike in a friend's garage with an impact wrench and currently have none), I'll probably...
