The UK's biggest automatic scooter forum.
Separate names with a comma.
I believe if it was a ring problem (thus, less compression), the problem would be more noticeable at low rpms and it would be hard to start up......
Yes, but my point is, it isn't always limited at 59. It can damage the engine, both top and low end, if exceeding that speed, but it should not be...
Well, I would like to hear an explanation to that "yes and no", tho I believe there isn't one. If you get maximum 59mph with power which ends at...
Seems electrical to me... Tried changing the spark plug? Usually as simple as that
Yes that's exactly it (it sounds ok tho, yu can just hear a small whistle at certain RPM), and yes the seals are in pretty bad shape too (you can...
So that should be it then, having a stardard and pretty used variator, and a sports exhaust (one of these days I gotta take a picture of it and...
I'm 100% sure this is the right belt for this bike. Also it still has that spike even if I've been riding the scooter for like half an hour, so I...
Alright, I got a used boss which wasn't too worn out and today I replaced mine with it. Turns out the rollers I was using have some flat spots and...
Link doesnt work for me
Colors vary from manufacturer to manufacturer. Anyway, I believe you can fit the strongest (2k) clutch springs in a stardard setup without a...
Thanks, in the next few days I might try to use my friend's BWS' boss to see if the problem gets fixed
Will try that in the next few days, thanks. Altho I believe i found the cause. Trying to slide the variator on the boss, it seems to get stuck in...
Do you have the stock exhaust? If so, I'd give it a go, before spending any unnecessary money
Correct me if I'm wrong, but when doing a compression test you're only testing the cylinder for its compression and not the crankcase as the...
But don't heavier rollers shot out easier than lighter rollers? If so, shouldn't they also require less centrifugal force to stay out, when...
If i use heavier rollers it upshifts too early and still doesn't downshift (I've tried before).. also, how can rollers too light stay out?
I seriously can't understand what's happening. Today I disassembled the driven pulley and replaced the contra spring with the strongest I had. The...
Porter, you might want to google "elbow grease" :)
About the rollers, that's what I asked :P About the variator plate, they're just visually shiny, you can't feel any outlining
Pictures of said marks in the rollers http://imgur.com/a/AU3BO#6 You can also check the rest of the pictures of the front pulley, I've been said...
