The UK's biggest automatic scooter forum.
Separate names with a comma.
I will post a vid as soon as its going Your welcome over anytime , see the girls in bikinis , surfers paradise Yeah the workshop is a good thing...
Looking forward to seeing this thing going Ok more pics i have been to busy building customers engines to work on my own This was the pressure...
No its fine Its being held in a non critical area Yes i hope to dyno it , hard to get a dyno small enough over here in australia
yes
Today finished setting the squish clearance, ended up having to run a different spacer as it was enough before but this one works well Lucky i...
Thank you and the exhaust ports scavenge better than a round one so they say Im not actually sure on that its just what they claim
Ok short block is together Sorry but you dont get to see the cases in there final state I have to keep some secrets But think about flow...
Sounds good Dump the oko carb get a delorto or a keihin
Here is the intake shaping pretty much finished Im using a 4.5 degree angled reed spacer to aim the reed down the port as best as i can Just...
Thanks Still alot of work to do on the cases yet, at the moment they are still very rough When its all finished it will look alot better
Yeah it will clear the crank If you look up into the trasnfer port area you can see where i have redrilled them to allow the bearings to breath...
[img]
Ok well this is the idea for the flow I was just putting it together after spaces had been made as a dummy assemble to see where I needed to grind...
Ok hot tanking is a process that removes all oil and dirt from the parts Watch for the updates and you will see what I am doing for a reed block...
Well got cases back from being hot tanked [img] Then its putting back in the devcon , as the hot tank rips it out [img] [img] After that...
Thats the wrong way to go about it Tune your variator for your pipe , try and hold on peak power of pipe not peak rpm of engine
Is it to quick off the mark for you the gear up will kill it off the line
Here is my scooter ready for the next race Going to brain them this time I hope [img]
Yeah I guess i am I normally just go to the bearing shop and buy the bearings across the counter. Im not one for buying Malossi bearings , i dont...
Seriously the shop is not telling you the correct information If you want to call me I am in Australia 0410665701 On the gold coast i am happy to...