The UK's biggest automatic scooter forum.
Separate names with a comma.
Run the mixture like it should be, as there will be extra 2 stroke smeared on the barel and piston
Check all bulbs work Check tyres Give the spark plug a clean to make sure it runs that tiny bit cleaner :P
Remember that the main jet only works from about 3/4 throttle upto fully open. Try changing the pilot jet. Wipe the plug over, start it...
Does the bike rev quite high when on the spot until the clutch bites?
Hello all, ive managed to get 30 posts under my belt without introducing myself. The names craig, im from south wales and I own an aerox. I...
I have only had my leo for about 3-4weeks and yesterday getting it up a curb, dented it and bent it slightly, would anyone be interested in having...
Doesnt the transmission cover start to rust when polished?
remove it. Take the belly pan off the tube just comes round into nothing. I think it puts air in the standard exhaust to lower the emissions
Use some panel wipes on the panel before any paint touch them. this ensures a good clean surface for the paint to stick to. You can pick them...
Hose pipe up the tip
I think minor should do a tutorial on how to change a crank :emb:
The 28mm carb is fine, I think what jamie is saying is that the jet is massive for a 70cc. Whip the plug out give it a clean, also I thought it...
Watch out if using the autolube as this mite have an airlock. When putting the piston and barel on wipe some 2stroke round with your finger....
Undo the screws on top of the carb (or twist dependin on carb). Pull the throttle cable out completly. Remove the slider and spring etc to...
Fitted a 72 jet with a 40 pilot, an its running really good, could do with a little tweak of the rollers/clutch springs/carb but otherwise its...
Just fitted a 70 kit and 21mm carb, running like a bag of bolts lol. The carb has a 90mm main jet which is the smallest size which came with...
All I have done is took a dremel and ground out the manifold to suit the increase in capacity of the 70 kit.. as for performance no idea as the 70...
How do I go about removing this? Its asif the pipe is fitted with a brass sleeve which then conects to a sleeve on the carb
How would I go about fixing these pipes to the delorto carb kit ive ordered? Do the kits come with the necessary ties?
Any ideas what the brass fitted hose is? Thanks for the reply about the coolant [img]
