The UK's biggest automatic scooter forum.
Separate names with a comma.
Hello Everyone, I was wondering if sand blasting the faces of the vario and pulley would help at all with torque and belt slip? Most of you...
The clutch is set as tight as possible right now. Black springs, light weights, both weights are set at Pos. 1. The rollers in there right now are...
not too heavy, only 195-200 lbs. Your average American guy.......
So I messed around with it a lot this weekend and I started getting revs of 13,500 with a top speed of 44mph!! I thought about it for a bit and...
ok, I'm going to try that right now. I'm going to go with the blue springs and the weights closer to the shoe pins. We'll see how that works. It...
But won't going to lighter springs allow the clutch to bite sooner than it should? Right now, I've got the classic "slow till about 10mph" then it...
thanks, that's the first response that I've heard confirming these revs. I feel a lot more comfortable knowing that I should be working in that...
Hey everyone, I'm trying to figure out if the rpm's I'm seeing on my setup are normal or not. I've got an MHR Rep cylinder with a C16 pipe,...
Ok, so I've got it all running now. It took a mix of (3)3.0's and (3)3.5's to get it running right. I've got the 105 main, and 105 pilot in there....
Is that mainly because Dellortos or so much better or just a "regioonal" preference? Also, question on carb tuning vs. tranny tuning. Is it...
So I got the MHR Rep on my bike now with the Yasuni C16. I've got 3.8g rollers in my O/R and I'm wondering what jet I should be running in my 19mm...
K, so I've got the MHR Rep installed, I'm still using the Arreche 19mm carb, now with a 105 main jet. I have a 24mm Arreche but haven't installed...
K, Here's the pics of the barrel. Let me know what you think. Also, what plug should I use with the new MHR Rep that shows up? Will the BR8EIX...
Well it's an AC motor. I originally thought that this was a true CORSA motor because of the black cast iron cylinder. But the cylinder head is...
Overly rich? I thought that running too rich would be the safer way to go to prevent blowing the motor? Wouldn't running to lean cause overheating...
Lack of air filter? I've got a UNIfilter on it. Was it the Air/Fuel mixture screw? Running lean?
So what do you suppose caused this? [img] [img] [img] [img] [img]
So which cylinder would you recommend, the MHR Rep, Polini EVO, or Polini Corsa (a real one this time and not a Contesta). I'm leaning more...
K, so the Yasuni blew the Corsa cylinder easily. However, I'm not convinced it was an actual Corsa. The Corsa is supposed to have a cast iron...