The UK's biggest automatic scooter forum.
Separate names with a comma.
Turbo it :D
What`s it for mate? We are setting up for a limited run of exhausts but each will be to customers specs (everyone has their own port maps as you...
Not gonna build it for him Minor just going to crunch the numbers and send him the specs to build to, it`s a challange so it`s a freebie and you...
Reading this thread with intrest and if you want Dylan I can send you a spec sheet (scan it an email it) of a pipe design for your current specs....
Try forming sentances :P
A Tip: When porting/flowing cases dont try to gat a mirror finish on the surface, aim for a smooth but slightly rough to touch finish. The...
Symtoms of too rich a main jet are the scoot/bike running well at 3/4 throttle and then slowing as you go to full throttle, not an all out cut but...
Not going into details but it`d help to read this. http://www.taffspeed.co.uk/page50.html Note that the std jet is a #53 and not a #50 as...
Ill just add (and this in no way is a dig at Malossi as they make some very good products) that we refuse to supply or fit Malossi variators...
Any change in the flow characteristics will affect fuelling, without knowing exactly what was done it`s impossible to guess at which way the...
The Blaster and Snake (as well as some other models) has a crank driven air pump. This is on the back of the engine under the intake manifold and...
That`ll work fine.
Just to add and save Minor blowing a gasket :D Buy the correct 1.5mm alloy spacer for the crank.Use this WITH a paper 0.5mm base gasket.It`ll...
May be wrong (it`s a rare occurance tho :-) but iv`e never come across a Jog with a 17.5mm carb as std (normaly it`s a delorto PHBN 12mm or...
Dads got a point but this is more likely with four stroke engines or fully synth oil (used to run Transit engines in using old oil :-) Got to...
The bleed screw on minerelli oil pumps (aerox/MBK/Malaguti etc) is right on the front of the pump under the plastic cover where both the oil lines...
Lol! I quickly edited that out when I realised you`ve got the 180, should`nt worry about gearing it up with the 180 box but as a matter of intrest...
Take it you`ve got the std 20.5mm Delorto, and a std-ish 180 set-up (barring the pipe). Just my opinion but I would fit the 172 kit first, the...
Squeeze a bigger back tyre in there :D that`ll up-gear it ;)
Usual restrictions apply (exhaust/variator etc) but on the Estilette and some Katanas thay have an alloy manifold. This is mated to the carb...
