The UK's biggest automatic scooter forum.
Separate names with a comma.
Oooooh no you ain`t going to put me on the line making predictions like that :P So many variables and it`s not just about brake horse...
15 tonne hydraulic press and knowing how to use it and set the gears to exactly the same depth as they came off the original shaft, gear ups are...
We`ll probably be there either the Sat or Sun (weather depending) say Hi if you see us :cool:
I`ll have a dig through my old back issues of Twist n go at the X-race results but as i recall a well set-up 172 with the usuall bolt-ons...
No! that`s the 2nd tallest gearing available. There is no best it all depends on your set-up.power and what you want. For road going 172`s...
Well the CDI change made no difference so I slotted the backplate and retarded the timing by a large amount. Starts up first kick now and runs...
Thought about the flywheel but it`s all good and locked on, would understand if I had a stepped woodruff to alter timing. To be honest it`s a...
Just fired up Mini-Me (our pit-bike) after a few weeks lay-off, sounded as rough as hell but idled away while holding the throttle, gave it a bit...
Well hat`s off to them obviously know their stuff :punk:
Yep last prices I saw was £95 plus post plus VAT Trade! oh plus the cost of the new piston kit.
Thanks Kyle. we refuse to have anything to with Stage 6 products in any form so did`nt know that . For the un-intiated: An alloy barrel has...
Theoretically: If your scoot was working as it should as a 50 and you were getting the full range on the vario etc then unless you are revving...
Similar to the CPI Aragon. Next step is Variator/Belt/Gear kit.
PMSL ! ! :w00t:
Honed? alarm bells start to ring. Well first if it`s a cast kit and the honeing was gentle to just remove a few scratches then it should hold...
So listen to whats been said and put a bigger jet in the bloody thing :sarc:
Too rich on the air screw, adjust it or fit a smaller pilot jet.
The problem could be your spark plug believe it or not! Make sure your running a resistor type plug for example: BR9es not B9es/ BR7hs not...
It`s prices and garages like this that give anyone in the scooter servicing/tuning trade a bad name :sarc: Edit: main Yamaha Dealer? that...
NRG`s are reknowned for blowing the stators. We had one once that would only run on BR9EG or EGV race plugs. Try a seperate engine earth...
