The UK's biggest automatic scooter forum.
Separate names with a comma.
I've got a zx on mine with a polini iron 70 kit. very torquey bottom end indeed :) like dave said, they're really not as bad as everyone says.
your gonna have to take the carb off anyway to change the jet- why not get some practice in now :P
woot- free dyno tests :D
I've just started running my engine in again after Tweak swapped my crank. Its a polini cast iron kit, with yellow polini clutch springs and...
There will be a restiction in the variator - washer There might be one in the carb- Either the needle needs moving up a notch, or there might be...
rofl- i suppose it helps if I actually connect the vacuum pump tube! doh.
What are the checks for this problem? Thanks.
Well i had two engines, one with 3k miles ( and a knackered crank case) and one with 9k miles (with a good crank case, and bad crank). He...
Would just like to say thanks to Tweak for his excellent rebuild on my engine. Really quick collection delivery, and great service for a...
Would just like to say thanks to Tweak for his great service. Very fast work, and excellent to boot. Would recommend him to anyone.
the throttle can only go on one way, you need to make sure you push it all the way down, and then just tighten it up with the screw.
I use POLINI gaskets on my POLINI kit, had no problems with them at all touch wood.... One thing I would recommend is NOT to buy cheap chinese...
have decided to get tweak to do it- thanks for the advice guys :)
For the circlips, I used needle nose pliers to grip the clips, then put them in at an angle. Then I used a screwdriver (carefully) to push them...
i can't use the good engine, which is why i swapped them - it has a snapped crankcase.
Right... I recently fitted an ill fitting variator and it's caused the end of the crank to get chewed up. I'd like to swap the crank for the...
i've got a benelli 491 (same engine as aerox) 50cc for sale... if you're interested?? 70cc, but comes with standard bore.
lightnening your rollers will seriously improve your acceleration, yes
you might need the BR8ES plug like mine did, rather than the BR8HS, because it mightl need a longer thread.
ignore him.. he's just pissed because he can't ride his bike until Friday init doe
