The UK's biggest automatic scooter forum.
Separate names with a comma.
one side of the bodys got dellorto other side says PHB6 or PHBG maybe, and has 21 just after that i measured the body and its like 21.3mm
okay dnt worry about gear up. lol, 'fuk it' your not a happy bunny ;)
the two connections on the manifold side just go straight into the main part (where the slide is) therefore dont pass through anything and will...
and he paid £900 loooooooooooool
cheers mate, so the fuel goes in on the air inlet side, and oil after the slide on the manifold side? ah right just over flows, fair do's,...
Also would i see any benefits from removing the airbox snorkel, or will this just lose the pressure in airbox?
Hey, just got myself one of these, but I need help as its connections etc are totally different to my current standard carb. Would really...
good job you sold it:) was the person you sold it to on drugs? x
do you know whether hes got a gear up kit?
well wen u say its shite what dya mean? explain it more, could be jettin, could be rollers, could be clutch setup, belt slip, anything tbh
with exhaust gaskets i kinda disagree with you there if its a paper gasket i'd defo replace, but a metal squish ring gasket can be re-used, as...
i said 15%, 5% for exhaust, 10% for filter ;)
upjet around 15% as they'll be more air flow due to filter and exhaust, you need more fuel to go with more air so it doesnt go lean and seize...
i just put 4.4 rollers in and a blue contra and tis shocking haha ill try the 4.4's with a white contra then blue contra with 4.9's :)
wher'dya get that from mate & how much isit
well upjet ur carb 5% from standard. get some stiffer clutch springs and a couple of sets of lighter rollers and experiment lol
putting a pipe on changes your bikes powerband, so it will need to rev more to use the power, so you need to stiffen the clutch springs or it will...
i want a geared bike jus so i can have a manual clutch lmao hmmmm how to do that
okay whip it off and look down the manifold where it bolts onto the engine, they're may be a restrited spot welded in, however i doubt it if it...
what oil do you use then? im using silkonline semi synth stuff atm, but ive now ran out so i need to get some really haha
