The UK's biggest automatic scooter forum.
Separate names with a comma.
To check any suspect air leaks wether crank seals/manifold etc. run the engine and spray round the suspect area with WD40, this will temporary...
As i posted above we can re-sleeve barrels and have the ports cut to any spec (including port corrections for different stroke cranks). The only...
No worries :mrgreen:
Hmm.. nothing will "drop-in" because of the strange set-up on the jog RR, the radiator is under slung and if it is rear drum then i don`t think...
The part numbers printed on the CDI will differ slightly as they are stock numbers, to order a genuine Yam one from a Yam dealer you need the Yam...
That black box is the CDI unit and looking at it it`s the Ducati type (they do two types, Ducati and Yamaha). Not sure if they are available from...
Ahh some wise person had the foresight to confiscate your tool box :mrgreen: (sorry couldn`t resist that, just joking).
We can do big bore conversions up to 200cc depending on the crank stroke, complete with our port specs so no port corrections needed and heads...
Re: aerox help electrical , i'm new lol There are two wires going to your brake light switch. Un plug them, turn on the ignition and touch them...
I concur, Didnt realise you were running a std crank, this combined with the amount of material taken out for flowing plus opening the base of...
You might get better results with the 180 polini variator and belt combo, as for getting more over-rev (basically variator opened out to max) I...
Im sorry i can`t help you any further as you have done all the port work it`s impossible to tell whats happening there.... but a 2mm spacer for a...
Re: Taylor Broadhurst 172 Promo bike for Maxi Launch**updates** Depends on which gear it was run up on on the dyno.....not bad if it was a 1st...
Re: Taylor Broadhurst 172 Promo bike for Maxi Launch**updates** Aha :mrgreen: that explains it, and not bad figures for the RS :)
Re: Taylor Broadhurst 172 Promo bike for Maxi Launch**updates** Thought that was way too high rpm :scratch: I`ve just freezed the frame on 1.37...
Re: Taylor Broadhurst 172 Promo bike for Maxi Launch**updates** Not been following this but read through the thread and could`nt help notice the...
Thanks :mrgreen: first time ive had to get on the puter this weekend as well.
Still wanted :) and to confirm it is the swing arm in the first pic, ta.
Well reading your spec on the bottom the first suggestion is a malossi secondary gear kit (if you are running std gearing), I would suggest the...
1 Kgm = 9.804 NM so your second set of numbers is correct. Rings, don`t know without looking but normally if they are different the top one is...
