The UK's biggest automatic scooter forum.
Separate names with a comma.
Don`t use the original head on this kit.Part of the power comes from the fact it`s centre fire, higher compression and the squish band is matched...
AIRC the Mikuni has a longer elbow on the carb top? You can`t swap mikky and Delorto jets. I know you did`nt ask this but for the record......
Simple: You "bug" or "bog" at a certain throttle opening, apply slight choke, worse/ too rich better / too lean. The same test can be done by...
Auto chokes work by taking ac current from the magneto (sometimes via the regulator) and passing it to the choke mechanism. This current heats up...
Yes. Nearly all standard Delorto carbs in the 12 or 17.5mm size take the 6mm jet. After market Delorto 19 and 21mm (phbg) carbs take a 5mm jet.
If the idle screw has to be fully in for it to tick-over sounds like an air leak some where. Did you use sealant on the cases? could have created...
If it`s a piaggio engined Sr50 then the bearings are 52mm x 20mm x 12mm. The SKF code is BB1B 447205 A If it`s a minerelli then they are 6205 C3...
Like it :thumbsup: easier to read and looks a lot "fresher" if you know what i mean.
Hi Jrme, If you get time look up a guy called Josh, he runs a business called Ride Scooters some where in your huge country :scratch: Got an...
Your best bet is to go to any moto-cross ,or i suppose if your in Canada , a snowmobile shop and ask them for any old reed petals or a sheet of...
Tried putting some oil in it? :eek:
Re: 25mm carb Sorry mate I seriously doubt your ability to do this. not being harsh but describing critical components as "the other other wires...
Watch it mate :glare: we resemble that remark :grin:
It clears all air cooled fan covers so if your engine mount is anything like the runner/drag then it`ll fit the engine side of things. It was...
The design has been decided and the testing done. They are available to order only at the moment through our website as we wont hold many in...
Sounds like it does need slightly weaker springs plus the rollers are too heavy.....if I HAD to suggest a weight it`d be 3.5-4.2g approx.
If you watch our video`s we don`t hold the brakes at all,it`s all about clutch set-up and balance. We are fortunate that our drag strip is more...
No point in posting exactly the same question in another section :rules: but i`m not a moderator so WTF.
The Chinese GY6 is a four stroke, it runs a keihin copy CWK constant velocity (cv) carb. The Koso PWK is a copy of the Keihin PWK developed for...
Sneeky peek at the newest prototype fitted. [img] hav`nt had time to put any pics up on our website but i will.
