The UK's biggest automatic scooter forum.
Separate names with a comma.
Lot of hassle for no gain. You'd need to the crank case but iirc TNT do some kind of wheel adapter which might allow you to run the disc wheel...
Was it jetted for the exhaust?
Pump is driven off the crank so just start it and oil will be pumped.
Will check this evening
Odd! None of the AC engines i've had has had one of those and i don't think my LC Jog engine has that. I'll be interested to find out too...
Those Sendas get mixed reviews. A 50cc will spend its life running flat out...IMO i'd be wanting to get him something 100% reliable doing so or,...
Is it just above the rear brake area facing the wheel? If so you may be looking at the overflow/breather pipe for the transmission. All...
No they're a different engine. An MBK Stunt is a rebadged Yamaha Slider - these use an aircooled "Minarelli" engine with a vertical pointing...
Remember these from like 10 years ago on car forums. What a load of old shite! They're just cheapo computer fans that spin at what, maybe 4000...
I think you're right. The closest topics i could find on the internet related to motorbikes and they say using a filter would require a Power...
Hi, I'm tempted to fit an open cone to my Peugeot Jetforce to give it a bit more noise (and maybe amplify the supercharger whine!) but i have a...
Very nice - like all your bikes! Has any tuning been done on it?
Mop as in a cloth (sisal) wheel that attaches to a drill. You get kits off ebay like this to do it;...
You might be in luck - theres also a guy on ebay who appears to be breaking an sfx50. Try sending him a message and see if hes got the stem;...
You won't be able to straighten that. You could try keeping an eye on ebay or the local breakers for some used ones but i think you'd be doing...
No thats spot on. K&Ns (and Green/JR filters) have layers of oiled cotton sheet sandwiched inside a wire frame to do the filtering. The all...
Except thats not a K&N filter you have. K&N is a quality aftermarket brand wheras thats a cheapo generic stainless mesh open cone you have...
The circlips are on the inside of the bearings (i.e. facing inwards towards the reedblock) and are just to centre the the mount between the 2...
Dude, I emailed them a few months back and got an answer. The gist is yes they gained more power but; a) some of the non standard parts they...
I didn't say they didn't. Whats your point?
