The UK's biggest automatic scooter forum.
Separate names with a comma.
If the plug is wet, its fucked. Get a new spark plug, and downjet a tad to stop it happening again. The ZX is designed to be used with the...
Fitting a 70cc bore kit is Illegal for ANYONE, even if your a 60yr old bloke with full bike test, and even if you got the bike re-registered as...
First of all, the TT is not a race pipe, its designed for standard 50's. And the sr125 carb is 20.5mm, either a dellorto or Mikuni VM20. Just to...
Technigas revolver... What a pile of junk. For looks only, but the thing is they look pants!
Ive never worked on a Peugeot scooter engine so I wouldnt know, but you will need to remove the transmission caseing, then with an impact gun you...
Whats a normal jack up kit made from? What does it look like?? Well theres your answer me old mukka..
Most probably the rear wheel bearings. You've been wheeling, so putting ALL the bikes weight onto the rear wheel. This would knock out bearings...
Sometimes its not as easy as that (especially at gun/knife point), but I see your point, I dont carry a claw hammer under my seat for no reason!...
Whats all this bullshit about 172's not being reliable?? This is coming from people who've never owned a 172... They ARE reliable if you know...
That hose is essentially a catalist converter, It should route round to your airbox, so the engine recycles some of its fumes... Removing this and...
Flowing the crank cases is part of porting.. You can run a stock crankshaft but you risk snapping/bending it. I wouldnt personally get the PM 172...
Blacks are standard, so try green or red. All 3 springs must be the same, you cannot mix like you can with roller weights.
Or just sit at the lights and have your ped stolen, yourself beaten up or even stabbed.. Id rather get hit by a car tbh...
Should be around 4-5grams. The clutch springs are your problem, you cant run it with 2 white and 1 black spring, I bet only 2 of the clutch shoes...
Yeh probably, glad you've sorted it now.
Very very rarely happens.. You'd need to have quite a large pair of bollocks to just walk upto and random guy on a bike and attempt to jack it.....
Aircooled engines are fine for your journeys, your engine may not cope because its cheaply made.. Chinese 125's rarely exceed 50-55mph flat out...
Looks like you've put alot of hard work, time & money into this bike, so its a shame your selling it! Looks real good, far better than the average...
Sounds like you need to adjust that clutch! 5.5g rollers sound too heavy to me if anything, my guess is the clutch springs are far too stiff, or...
Electrical problem, could be a bad earth and this is probably causing the engine to run irratic too. Something is making the frame or just the...
