The UK's biggest automatic scooter forum.
Separate names with a comma.
i always bleed the coolant with the engine running...
a video maybe of the racket....
1st of all you need to determine wether you have a bleed nipple or not... its usually located on the cylinder head or at the highest point of the...
or... just had a thought :grin: maybe your thermostat has stuck closed :glare: you can take it out all together, i dont run with a...
I like (old school) mini's, keep us updated on the progress m8 :)
ive got a manual choke carb on my Runner: I put the choke on for any cold starts, let it idle with the choke on for 30 secs or so, switch the...
Sounds like you have an air lock, have you tried bleeding the cooling system :)
that is a bargain :good:
Re: hello i'm cameron capper hmmm thats pretty short :huh:
Re: hello i'm cameron capper how tall are you ?? :)
14v sounds a little high to me :glare:
why not bolt the number plate onto the back of the air box :glare:
Re: hello i'm cameron capper welcome :)
as far as i can tell by cross referencing part numbers, no a speedfight 100 clutch wont fit onto a 50cc engine...
yeahh just tape it up out the way so no bare wires touch the frame etc :)
you seem to be missing the point of the spacer... its there to align the variator pulley with the rear pulley, if the pulleys are aligned without...
its normal actually for the pinion to fall out....try oiling the mechanism, sometimes they play up when the grease gets washed off. also the...
x2 :) Bolt on Tuning is about fitting matched parts, fitting unmatched parts isnt tuning, its called throwing parts at an engine, and being...
in that case some cave man has fitted an air cooled engine into a runner, its a direct fit anyway...just slots in place of the liquid cooled...
i can never find my circlip pliars when i need them, so i sharpened the ends of an old pair of long nose pliars to a point, and use them to remove...
