The UK's biggest automatic scooter forum.
Separate names with a comma.
Definitely a warped cylinder head, I reckon. Try this old biker trick. get some medium and some fine grade wet and dry silicon carbide sandpaper...
Whatever you do, Scootz, stay safe, eh? Take care you daft bugger. Dave (Merlin)
@ Scuba Warum moechtest du ein beiwagen? :D (Yes, i can read, write and speak German)
Crank seals or weak mixture is my guess. A weak mix will cause a backfire, a blocked exhaust just makes more noise.
Easy Rider - no contest. One of the best bike films out there and it wee-wees all over Silver Dream Racer.
Try it anyway, the worst that will happen is the bike will bog down a bit. You won't do any lasting harm.
Exactly. A 104 jet might work with the needle set at the top groove, try it. A lean engine sounds very tinny and WAAAAAA!! in engine tone, an...
After the second kit you should have been asking what is wrong. Jet the carb up one size for the exhaust and up another size if you have a sports...
Yeah, I'd take the jet size up one notch to a 102, just to be on the safe side.
Have you had the front panel off the bike? Some Peugeots have the immobiliser CDI located behind the headlamp, as it's bigger than the other type...
The original worn seals may have been borderline on the original kit and the uprated sports cylinder kit may have tipped them over the edge. They...
I would certainly check the master cylinder, as it's a serious safety issue. A vacuum brake bleeding kit is also a worthwhile investment, as it...
Worn out assholes? :eek: :D
Bought a brand new boxed Draper air impact wrench for silly money today, at a car boot. On the way back, called at Machine Mart and bought a new...
Steering head bearings and new stickers for the forks arrived today. Just waiting on the new forks now.
Check for evidence of fuel/oil mixture getting into the transmission or ignition stator sides of the engine. When you rebuilt the engine, did you...
OK, start from the HT cap at the spark plug and work backwards. You may wish to remove the side panels and seat bucket, as this will give you more...
That's the oil pump controller for a Dellorto electric oil pump. The CDI will be underneath the footrest panel, near the battery and will be a...
Yes, I alrady re-packed it, but the Yasuni Z is a loud pipe anyway. I found two small sheets of perforated steel with different sized holes. The...
Or possibly a 'blizzard apolcalypse', if you are a Daily Express reader. They seem to predict this on a weekly basis, even when it's 90 in the shade.
