The UK's biggest automatic scooter forum.
Separate names with a comma.
If it's the belt driven water pump, check the belt, it may be snapped or damaged.
Peugeots are somewhat fragile and you need to keep on top of the maintenance, or they end up breaking your heart and wallet. They also don't take...
Take the wheel off again and check the alignment of the brake shoes. Make sure that the heels of the shoes are centered on the actuating pin and...
Yes, it should turn with the wheel. Your back wheel is bolted to the output drive shaft of the gearbox that is the rear axle. Your scooter is AOK.
My bike has the Dellorto system and the pump is the same as the Speedfight 2 (Dellorto ACPH1). On my bike, I disconnect the oil pump wires from...
Some GY6 engine CDIs have a rev limiter wire, it's pink on some bikes but you need to check, as the Chinese don't always use the same colour...
You need an alarm (preferably with an immobiliser), a disc lock for the front wheel and large hacksaw-proof chain with a drill-proof padlock to...
It could be a weak contra spring (the spring that makes the pulley close up again) on the clutch. What is more common on scooters is that there...
Upjetting depends on the carb (Gurtner or Dellorto). The Gurtner PA360 and PA370 will need a 76 to 80 main jet, the Dellorto PVHA 17.5 will need...
Yeah, exactly that. Unplug the pump (the plug with the pink and red/white wires), turn on the ignition (don't start the engine) and then plug it...
OK, try this. Unplug the oil pump and take off the oil pipe at the carb end. Turn the ignition on, then plug the oil pump in and leave the...
You need a 76 to 80 jet, you are running lean and are risking a heat seizure.
You need a Koso clock or similar.
You need to check your piston for scoring, your lack of performance hints at a mild heat seizure. Peugeots run pretty lean when it comes to oil...
Just a thought. A motorcycle needs a sidelight, dipped beam and main beam as well as needing a number plate light to conform to the Construction &...
Put the Speedy 2 stator and pickup into the Speedy 1 engine. it should fit, the mounting bolts are the same and you should get the lights and...
Garren, From your PM, I have deduced that you now have put a Speedfight 1 engine in a Speedfight 2 frame. The stator and pickup wiring differ...
The coil isn't as traditional coil like on a car. The coil takes a pulse signal from teh CDI and converts it into a spark. The coil is che cheaper...
I'd suspect the coil then, as being the cause of the lack of a spark. I have known them to fail.
Yes, that's correct, so the black and white should connect to the green wires (earth) with ignition off and to red/blue with ignition on. Black...
