The UK's biggest automatic scooter forum.
Separate names with a comma.
not sure about the oil on the air filter :s might of already been there? But if your not sure if your bike is running lean or rich, look at this...
Post Pictures of your Piaggio Zips here :) ZIPS ONLY!!!! ZIPS ONLY!!!! ZIPS ONLY!!!! ZIPS [IMG] P.s ZIPS ONLY!!!! ZIPS ONLY!!!! ZIPS ONLY!!!!...
Check the variator its the only thing I can think of
Hey, Recently purchased LED sidelight and indicator unit as my old indicator lenses were broken and would of cost me about £36 for them and for...
65 jet should be fine piaggio's idea of a de restriction uses a 60 jet. Take the spark plug out and whipe it put it back in and run for a while to...
Change the rollers to like a 5g or 5.5g 3.5g make the bike rev ridiculously high and gets you no where. and a 100 jet for a 70cc with open air...
If its a 70cc with a 17.5mm carb you need somewhere in the ranges of 100-120 might even need to go higher upto around 135 dont quote me on this...
I had a look in my airbox and at the carb I have no brass plate what so ever and it wasnt there before I put this jet in so I doubt it is to do...
Just checked the only thing they have is gimeca front brake service kit for gilera runner which has a different brake so pin and clip are going to...
I have a 05 plate A/c piaggio zip with the standard front brake caliper. Does anyone know where I can get the pin for holding the pads in and the...
I recently took off my carb and up jetted from a 60 to a 62 jet. Bike runs fine until 3/4 throttle anything past 3/4 throttle and the bike just...
Hey, I need to know what jet sizes to buy for my 05 plate AC zip. Standard 50cc bore and piston. 17.5mm Dellorto carburettor De restricted...
