The UK's biggest automatic scooter forum.
Separate names with a comma.
Just gone back outside to carry on with work on the engine, its fighting me quite a bit, maybe due to the fact that its been sitting for a while...
I am guessing I would need to split the case for that though? I don't have a new crank etc for it yet, I might look at fitting a standard zip 50...
Yeah I saw that pipe on ped parts for the zip sp and gradually traced the part back to where it fitted! I am guessing that I would need to block...
Ah ha! It seems that mine is partly hidden by the stator wires! How is the OEM pipe secured in? Could I just bolt the pipe in, not fit any...
I can't see to see it :( [IMG]
Thank you, I need to give it a clean up before taking parts off, although the side cover isn't on over the variator the rest of the engine is...
Its a bit too late for that, I might just run it air cooled initially then swap to water cooled, I have 3 spare rad from my Blata etc
Ah, thats true, I could run it off that as if its a headlight etc, where is the stator located btw? Is it sitting behind the flywheel? I have no...
Right, update so far, I have got the fan housing off, all 4 holding screws have sheered, they are badly rusy and there was no way they were going...
The bike won't be running a battey etc the engine will be running off a CDI, im running the engine as a standalone and don't want to add a battery...
Im having issues trying to get the plastic fan casing off to check that side of the engine, the screws are stuck and not budging! Im guessing I...
The stock air box is part of the tuned intake btw, much like the exhaust, there are intake pulses coming back out the carb when the reeds shut,...
Erm, you need to check the ring gap clearance before installing a piston ring, you might need to file the ring down slightly to ensure that the...
The Blata B1 LC engines when ordering a new cylinder or piston have different sized pistons A, B or C, its the same displacement, but they are all...
Could it just be massivly overfueling and then bogging down?
Hi there, Check out this thread that I started - basically the CVT will only go up to a certain speed, once its maxxed thats the top speed,...
I saw on tErr0's 70cc project thread that he converted his air cooled engine to water cooled:...
Only the cheap ones are aircooled, my Blata B1 is a 37cc water cooled engine, around 8bhp :) the top spec mini motos from Polini etc cost about 3...
Hi all, Just wondering about this, I have just seen a video about swapping out a final drive with an OEM gearset from the Liberty bike, its a...
What conrods would be best with the 70 kits then? I have heard that Hebe cranks and rods are used in the stronger race engines
