The UK's biggest automatic scooter forum.
Separate names with a comma.
give the plug a clean and see if there is any difference. or get a new plug depending how old it is. could be more but keep it simple to start...
check if the cog with the worm that the kickstart gear drives is worn. I had this problem. replaced both the cog and the plate on the pulley it...
welcome
no need at all, when the engine gains speed and the choke is warmed the pipe will be clear, as there will be a constant draw across the jets.
when idling, it is normal for the vaccum pipe to suck whatever is in the venturi of the carb, especially on a small venturi, as the suction from...
Wunny, couple of things might be possible, the pump is gauged for a 50cc engine, so increasing the fuel consumption may need a recalibration of...
let me know if you get it running ok,
also try taking the air mixture screw out a half turn at a time, for some reason I thought it was something that happened recently. but the owner...
yeah, sounds like the carb, give it a clean also check needle position and give the air filter a clean as well. when the throttle slide is fully...
looks amazing.
depends on the severity of the crack, hammerite brush on paint can also be a good filler, before sanding. Spray the back of the panel with...
you paid for a fix and service so thats what they should do, though sounds like a clutch problem to me.
what condition is the plug in that you take out
sounds like an air/fuel mixture problem to me. I had a similar problem with mine. I disconnected the air filter and placed my hand over the carb...
you could check the vaccum inlet connection on the carb isn't blocked.
lol, didn't notice, I was searching about carbs
give the jets a blast with air duster as well. or any sort of pressurised oil (WD40, contact cleaner)
