The UK's biggest automatic scooter forum.
Separate names with a comma.
[ATTACH] sprayed the tailgate [ATTACH] sprayed the rear frame [ATTACH] cleaned up the rear shock, now time to work on the front end
[ATTACH] cleaned and painted underneath [ATTACH]new piston kit fitted [ATTACH] tested and fitted the starter motor and painted the stand, put...
[ATTACH] with all panels removed, flipped the scooter upside down to clean underneath, piston was original and some slight scoring on the barrel....
[ATTACH] decided to leave the engine cover covered in paint stripper while I checked over the engine
[ATTACH] the exhaust was easily displaced from the factory preset position
[ATTACH] [ATTACH] [ATTACH] time to start removing things
Thought I would start a thread on my Liberty. I will try to get the pictures in the correct order. Bought it as a non runner and was headed for...
Welcome
on alarms, some have 2 wires that light up your indicators, it must be a 12V spur. it could be used for anything ?
I decided to remove my rear hub the other day as I will be putting new bearings on the wheel shaft, drive shaft and replacing the carrier bearing...
thing is I'll never use them. they were left over from the stolen Suzuki. I would rather someone got the use of them
new suppressor cap arrived this morning, all done. Then went for a run on some country roads. fresh air again after being stuck in the house for...
looks ok, whats the problem. its yours, not theirs.
had no spark on piaggio liberty 50 so decided to post this guide to what you should read from each wire with a multimeter. 1. Disconnect the CDi...
the alarms good for when your parked in shopping centre car parks and in town, or nipping in to the shop.
20 quid
I have had a day, checking ignition wiring, all good except the CDI unit. it was shorting exciter coil to earth. 15 years old so no surprises, the...
I got one that phones me if its moves, pretty reluctant to post what type after getting the suzuki stolen, as all visitors can see any post
if you cant find any air inlet leak, try cleaning the carb jets, take the jets out blast through them with air duster or wd40 or contact cleaner...
glad to hear its sorted