The UK's biggest automatic scooter forum.
Separate names with a comma.
think the choke will be ok, the default is on, and you would have had the scooter starting then flooding after a few minutes, hope all goes well...
yeah, same carb as me PHVA 17.5 some have the jet and others don't, you should maybe check the autochoke wire it straight to the battery and...
its an m6 thread, after I took mine out I replaced them with m6 bolts, just used a set of mole grips to get them moving then a pair of pliers...
if your getting a spark, I think you will find the problem with the carb, check the reed block and manifold while the carb is off, you have a...
Jog-rr-madhead. you need to measure the resistance in ohms for the stator and pickup wires. it lets you know if theres a broken wire on the stator...
[ATTACH] found this as well. you should also test your stator on AC voltage not DC as its not DC until its regulated at the rectifier.
I found this for most generic chinese scooters although I dont have one. wouldn't know if yours is the same...
just had a quick browse for you, some people (not me) claim the 110 CDI fits from looking at the answers here...
very nice looking scooter, glad to see you have it how you want it.
I see a few ads for suspension blocks that raise the rear shock, but I'm trying to assess the benefits, is it for allowing a softer suspension so...
wire your starter motor direct to the battery for a few seconds, use a couple of independent wires to bypass all other electrics.
very nice, like the sticker
its a bugger trying to get the drill straight if your using a hand drill but make a good centre punch in the bolt head, then use a pilot. If its a...
is there any chance of getting a set of mole grips on it. if so soak it with WD40 first and leave it for a few hours, heating it with a blowtorch...
thanks, was really worth the effort. still renewing parts as I go. the next step is to replace all bearings at the clutch/driveshaft end. they are...
just thought I would share the points system DVLA use for registering radically altered vehicles. Keep the original registration number Your...
welcome
[ATTACH] painted all lower plastics and rear mudguards [ATTACH] CV cover turned out good [ATTACH] last photo I took before finishing the...
[ATTACH] new steering bearings top and bottom, cleaned the raceways with a soft brass brush on a drill. [ATTACH] beginning to look like a...
[ATTACH] removed the front end in need of a clean [ATTACH] also in need of a clean and new bearings [ATTACH] much better, ready to fit...
