The UK's biggest automatic scooter forum.
Separate names with a comma.
Hi The Malaguti is a minarelli horizontal engine. I know a little bit about this motor. Suggestions: All Steeve P's advice is spot on. But if that...
Hi don't understand what you mean! Does not sound good! It needs to be bolted onto the corrector with as much force as possible. There is...
I just get on with it and feel a bit sleepy at around 4 in the afternoon. But I am weird. Sport is a good idea. Turns bad fatigue into good. Lots...
Hi CR there are three things you can do. First, get the stiffest clutch you can. I have yet to find one stiff enough and I use a Polini G3 which...
I like nothing better than good scotch! I don't suffer from it though, which is a good and a bad thing........
https://www.flickr.com/photos/116877957@N08/14074090244/ I wear this - HJC.
Start scooter. Put it on the central stand. remove transmission cover. Accelerate and watch. See any eccentricity on the crank/transmisson shaft?
Le plastique, c'est fantastique! Gf is half way through her running in and taking it very seriously. Amazing! Put a new (old) kick on there as...
If the CDI is indeed restricted then yes get a better one. But restricted CDI's are quite rare. Check first before spending the cash !
Steve Try a 68 jet? Just went for a cruise on GF´s scoot. Runs very nicely. I was very gentle, but you can tell there's power waiting to be...
with the choke open you've got more petrol going in and less air. What I would do is forget about the tickover for the moment and concentrate on...
Just kicked it. It starts. It holds it's tickover nicely. It needs some running in. Sorted!
I hate it when they conk out. This business with my GF's scoot is just the latest in a long history. The first time it was just the spark plug...
Just pressure tested the engine. It holds 1.5 bar indefinitely. It's tight. This is the acid test and it passed with flying colours. Just got to...
wize wurdz! I would so love to go back to boston (Mass) and check it out. I learned how to ride, fight and ski there.
My bad. The street race went on tonight. with a 1.2 mm squtch and the doppler ignition too....
that will work fine. But you will need to plug the oil inlet pipe on the carb. Normally they are supplied with a rubber nipple to keep crap from...
I think I figured out how it happened. The pin is missing from the piston and the ring is back to front. So the pin falls out (whicjh isn't...
So I dropped the motor off my GF's scoot to start the repair. She conked out on the way home, on a long straight. Scoot recap - Ovetto, Stage 6...
I wasn't aware they came with resistors!
