The UK's biggest automatic scooter forum.
Separate names with a comma.
Dell'orto 17.5mm Iv put a 68 in and it's nearly there might go for mid 70 and see what that is like
It doesn't take well to full throttle by the way it bogs out maybe jet is too small???
Ok 75 it is then, the lad at the shop said a 68 would do I had a mess on with it got it started and running round the block and still isn't...
i dont know about the rollers i had a fiddle with the screws today and got it runnin it was better than when the 58 jet was in reckon i just need...
I have recently put a 70cc kit and Leo vince on my piaggio Nrg mc3; I had a 58 jet in and it idled good and would pull away like a rocket then...
Iv just put a new piston and rings, spark plug and top end gasket kit on my Nrg, i had bother starting and realised there was no vacuum pipe...
Ok thanks a lot again just need to sort out some missing plastics and its good to go
Ok so..i have just put a vacuum pipe from tap to carb and cleaned the (i think) 58 size jet and sprayed carb cleaner all over the inside and got...
So should the vacuum pipe go to the carb because there is no pipe on the vacuum could this help??
On the fuel tap there is an extra connection below the mam outlet...what is it and where does it go to?? Also how do i know oil is getting to the...
The carb
Ill try anything this damm thing is giving me a headache just wish it was less of a fuck on!! Im gonna check jet size if its printed and also...
It had a 70 kit on when i got so done know about the jet im gonna go and take the carb off and see if anything is blocked, its been left for days...
Its an auto choke by the way
Ok so state of play is i dipped the spark plug in petrol, IT STARTED!!! then died straight away...the plug gets wet so i don't understand why it...
Ps how do I check the choke???
Gonna take the carb off tonight and see if it's all clean n stuff. Iv kicked it while turning the throttle as I kick, not tirning it at all and...
Hello again I hope this goes to the top of the forum, I bought a gasket kit put cylinder base and head gasket on and it still won't start. I...
I fitted a new head gasket to a cpi sm 50 and don't know how much oil to put back into the gearbox and can't find it anywhere online!! Please help
Ok I'll get one tomorrow, cheers I'll be back lol
