The UK's biggest automatic scooter forum.
Separate names with a comma.
i also changed the carburettor to a BGM si 24mm [ATTACH]
Front end [ATTACH]
yeah its good condition ish its all there most of the lugs on the body work are broken. wont be long until that one gets restored. i wanted to...
187 engine fitted. [ATTACH]
ok not posted on here for a while but i have done a lot more.and its almost complete another scoot has appeared in the garage. [ATTACH]
I'm from Kent 20 miles from London
Has anyone got any recommendations who to use to get my new 172kit tuned / ported for 55mm stroke ? I done the long stroke myself on my vespa. but...
its a bit of a pain ant the moment because i do not have a work bench because i have just moved house relay so everything i have to do on the...
i have some pictures if the engine no that many but the cylinder kit i chose was a VMC 177 cylinder kit. The main reason i chose this kit was...
Hard to say really sounds like you have more than one problem. Very difficult to tell without seeing it. The rollers could be worn from stopping...
You could take the radiator off and check that it's not blocked up with rust or anything. I guess you have bleeded the air out the system and used...
As above if its damaging the battery first thing to check is the regulator. Get a multimeter meter on it check the voltage
Stainless steel button bolts and nylon washers for the front mug guard. Before they were just normal cap heads like the two in the pictures. [ATTACH]
some pictures with the foot rails fitted.i used nuts and bolts to fit them rather then pop rivets how they come [ATTACH] [ATTACH]
[ATTACH] [ATTACH]
some of the loom [ATTACH] [ATTACH]
I have done quite a bit more including fitting the wiring loom though the body and the gear cables and brake cables i dont have many pictures of...
I might use the sip box exhaust they are ment to be better for low torque and touring. I have a high reving motorcycle if I want to rev high. The...
Nope no ramp needed
if it works like you say when putting the screwdriver across the starter solenoid terminals then its most probably a faulty starter solenoid.it...
