The UK's biggest automatic scooter forum.
Separate names with a comma.
Ah yes, got you. I have found a 15k thermistor, and rigged that up. Same range as the original temp sender. Still flashing, when the 'flying...
Already tried that, running external battery to the LCD. Don't have any other sensors. Have just cut the sender supplied wire, right back to...
I did wonder about noise on the power line too. So I connected the power to a totally seperate battery, a car battery off the bike. But still...
But definetly wired correctly with what was supplied. Faulty sender maybe, noisy ignition . maybe some ferrite rings or capacitor to ground on...
99.999% sure this is the same as the one supplied http://www.pedparts.co.uk/c/asset/Stage6_Instructions/S6-4033xx_EN.pdf
OK, I will do when I get back to the workshop, But it is the sender that came with it, and the original wiring from sender to head unit is all...
Just fitted a S6 mini LCD temp gauge to an aerox. 4 wire job, switched positive, ground, and two wires to the cylinder head temp sender. Seems...
I have situ started playing with the wiring for an Aerox and we have removed the electric choke..but in testing it and reading up about it..you...
Did you get this fixed? If you have fitted new stator and rectifier/regulator it sounds like there is some break between the two, so the reg is...
Original clock had no tacho, so no wiring I can see. I'll do the coil feed unless I can find u used wire that would have fed a tach. I am...
Ok, well i found the tacho instruction sheet It gives 4-5 methods to connect, Splice in to input wire, output wire to coil, use original CDI rpm...
Another question Dave ( the owner bought an aftermarket tacho. any one know if i can just tie the feed to that directly from the feed INTO the...
Hi thanks for get back to me Andrew Cook from pedparts did send me that link earlier today..he did say the he did not have the latest wiring...
OK, welI did a bit more work this evening. I found that the AC blue and blue/red (auto choke and lighting) wires are spliced in to the Yellow/...
Hi guys, Doing some work for a mate , on his Aerox 50. He has spent lots on it... lots of Stage 6 parts, 24mm carb, 70cc, different crank,...
