The UK's biggest automatic scooter forum.
Separate names with a comma.
I cant find the clearances n the original manual...any idea what they are? I am in the workshop now, just getting rocker cover off but can't find...
Thanks turning the engine over is going to be a pain... guess starter motor ..
Great, thanks well I bought the plastic primer..£18 for on elite, ..and got 2k primer, base coat and clear. Thanks Wil hit with eh plastic...
Have a few scrapes down the side of a Gilera Runner ST125. Are these panels painted from the factory or is it coloured plastic? Wondering if I...
While I have all the plastic off, was wondering if I can check / gap/ adjust the valve clearances with the motor still in the frame ? Looking...
Thanks guys I had seen the Malossi 200 kits with heads etc on Ped Parts and it does then start to get pricey. Guess I'll look out for the 300...
THought it would be too much to hope for ! but worth asking. Suppose a full heart transplant from a Vespa 300 is the best way to go...or just...
OK, so I replaced the breather from rocker cover to air filter box..seems to have improved a bit. Idle mix screw two turns out. But still at low...
I have a Gilera Runner 125 4 stroke and believe this is the Leader motor? From lookign at the drive train casing and engine side plate area, it...
Now that is a suprise, Suprised by that sort of sloppiness from a German company like BMW. A cheap far east product yes... Gilera. ? Italien or...
Just to post this info here to confirm it and let it be know if any one else searches for somethigin liek this..here is somethign else I ahve...
Hi yes It is a pig to get to, but can be done with all plastic work in place with a long thin flat blade screwdriver from between the rear...
Thanks I'll replace the damaged rocker cover breather pipe, screw it back to 2 turns out and see if that improves things Thanks
I have searched for an age..and can't find anything in else online.. Anyone tell me the correct number of turns out of the mixture screw on the...
Damn, was hoping rather liek th system on the Harley and the TC88A that the ECU/CDi sent out a speed signal as weel as the igniution pulse So...
Do these Gilera CDI's also drive the speedo. In particular a 2010 Runner ST125 I have not looked at the bike I have , and I am now at work...
Unfortunately it is a digital speed read out. Guess I'll just have to remember a few key speeds
What about a 2010 Runner ST 125, 4 stroke ? I can not seem to find a bleed screw/ bolt. I took off a single pipe from between inlet manifold and...
Yes, true, but a 22% error is a bit much!
Ah OK..too new to scooters to know that a '172' is a two stroke... this is my first scooter..only had full frame style conventional bikes before...
