The UK's biggest automatic scooter forum.
Separate names with a comma.
im using 6g rollers but there is some sort of tinkering sound inside of where the rollers go when I rev the engine??
My YN50 54 plate keeps bogging down when it goes up a hill...I don't know what the issue is; Bogging is basically it revs completely then just...
This didn't fix the issue :/ When going up hill, the bike still decides to bog down - revs just completely die down to idle & it loses power...
i'm no expert but I would think so :D 2 strokes (Especially 50cc's) get thrashed all the time so I'd think the clutch shoes get worn out quicker...
Thanks once again Steve for helpful response :) with a bit of investigating I found that the clutch bell is very worn out so the clutch is...
Thanks mate, took a look at that & replaced the reed valve - runs a bit better but just realised the clutch is slipping. Have replaced the clutch...
Hi guys & gals, I am having a bit of trouble with my scooter losing power at high revs. Just a general question here but could reed valves in...
have you checked the air/fuel mixture screw??? That should be out about 1 1/2 or 2 turns (I found just about 1 1/2 worked best on the Neo 50cc)...
Okay that's great to know! Going to order some jets and an element for my air filter to see if that makes a difference then a new carb in a few...
Okey sounds good! I did notice that the revs were a bit unstable so maybe it does need upjetting. Would a change of exhaust require an upjet? As I...
I have a Technigas exhaust of some sort so I assume it is quite decent as I've heard good things about Technigas :) how would I tell which jet...
Okey :) I think I'll get hold of the carb first and then save a little longer to get the 70cc kit and the other bits & bobs you recommended. What...
I was looking at getting a 70cc kit & a 17.5mm carb as said above in a few weeks, I already have a decent performance exhaust from what I can...
Thank you very much for the suggestions mate; I have already stripped out and cleaned the entire carb - I did so by wetting a paintbrush with a...
Hello there all, sorry for my first post on the forum asking for help but I am in some need of desperate help. I recently got hold of a 2004 Neos...