The UK's biggest automatic scooter forum.
Separate names with a comma.
probally try 13gram on rollers and maybe summat like a 90 or 92 jet best of gettin a few rollers from 10 up to 13grams and a few jets n see wat ya get
maybe jettin or variator rollers mate try these fisrt
ye mate runner is a piaggio engine so dont worry but when u put engine in make sure the cylinder head does not touch frame as mine did when back...
ye will post vid tomorrow gonna take it for a test ride keep checkin for more progress
few new pics after new paint all i need to do now is tidy wiring up and source a back brake leaver and cable then done :)
anymore projects ?? or conversions
it wont warp mate dont worry done it loads of times i never use torque settings
u dont need to toque em down mate u just need to nip em up really just dont go mad on em or they snap
hey mate get malossi 172 kit from pm tuning or psn scooters would prob go for 28m carb and use normal crank with new bearings
every 1 learns there own way mate lol
all i did was get a hot air gone and tapped the bearing in with a rubber malett but u can do it a few ways lol
if ya need any help mate pm me and ill help ya with most of the stuff
a 70cc will keep up on take off but not top end speed if i put a 54mm crank and malossi 172 kit and 28m carb a 70cc would not have a chance and...
that was same here spendin too much all time so got 125 n spent time on it gettin it straight n accurate it all pays off just got to have general...
go for a 125 lump lol be worth alot more and will be far better than 70cc mate i would never go bk now
np mate here to help anytime :)
a good prise me try each side bit by bit will take a bit of time but should come off
ye mate all i did was get the nut off with a impact gunner of flywheel holding tool and i prised mine of with 2 screw drivers worked for me
hi mate u would have to get full wiring loom plus cdi,coil,voltage rectifier,and engine mount ure old mount should be ok to fit but might need sum...
i swapped my engine for a 125 engine i had to buy wiring loom and cdi and coil and voltage rectifier and engine mount cost me about 110 for all...
