The UK's biggest automatic scooter forum.
Separate names with a comma.
These are the fork's, benelli 491 fork's made to fit typhoon/runner 50 wheel. 32mm stantions like f32's, new seals/fork oil, have cut the mudguard...
I'll sort some photos out.
I should have said, measure up and cut n weld stem if it's a different length making sure bottom race is the same size etc. Also note that the sr...
If it was the water pump it would leak water into the transmission case, sound's to me like head or base gasket gone.
An old set of typhoon clock's!
I ,like my headlight nice and bright so idiot drivers can see me better for when they pull out on me!
Make them fit!
I'm sure most members on this forum have scooters, hence the name "scooter shack" and don't know anything about your Yamaha motorcycle or tuning...
I use gilera runner 50 fork's modded to fit my typhoons, i also use 12 or 13" wheels. You could make any forks fit if thee the right length, vx...
Check that the choke isn't sticking/staying open.
Do your cbt and get a 125, SYM joyride or SYM citycom have high bars and plenty of room.
The std carb/airbox will work fine, just up jet a little to suit barrel/pipe set up.
Get some pictures up and let us see the crack, where about's are you?
The clip is a horse shoe shape with a flat sides, hold's the barrel to the glove box push/ ignition surround.
This is the pre-leader engine, sometimes the O ring seal on the oil filter housing (picture 1)can leak, worth checking out!
No, it's TAIWANESE, the same place where your mobile phone, tv and anything electrical is made but nobody question's that! A new KYMCO will be...
Probably a rev limiter to stop it blowing up!
It should have a 86 main jet if it's all std 125, make sure you have no air leaks on the intake.
If your riding it to the rally then i'd advise to up-jet it slightly, rolling roads tend to set them up on the lean side.
You named KYMCO in your list, you won't go wrong on a KYMCO, they make the engines for the new soon to be released 650cc BMW super scooter. If BMW...
