The UK's biggest automatic scooter forum.
Separate names with a comma.
I went to Blackpool to fetch this and my Daughter's typhoon, that's about a 300 mile round trip each time!
To be dead honest i don't know what your trying to do? Why do you want to drain the 2t oil? If you have bled the 2t pump, run the scoot up and...
Well said Wakelin!
I've got a nice typhoon!
Just take the pipe off the 2t oil tank.
I've got all the parts you want, what needle is it? There's 2 needles!
Yes as wakelin say's, it's a Ditech engine, the round hole is where the air pump fit's for the fuel injection. It uses a different crank to the...
Ok, I'm not going to argue about it, just to say i have never had a problem as your've said by removing the brass plate.
Being a Kymco it will be a reliable ride!
If you up jet to 58 or 60 main jet it will work 100%, the brass coloured plate is part of the restriction. By all means leave it in if you don't...
If your stalker has 120/90-10 tyres then the nrg wheels will fit, just need to make a front brake calliper extension bracket as the nrg has bigger...
Yes, your's will probably have a 58 maybe 60 main jet, i'd go up to 62-64? there's no set size to use, use the biggest jet that it will run on...
I'm in Leicester, north side. Let me know if your interested and i'll pm you my number, do you want to view it first?
I think there is 7 if without checking an engine.
Turn ignition on and press n hold mode button in for a few seconds, it should then start to flash hour, press mode again until hour set, press n...
I believe it sit's behind the impeller, i've never fitted it to any of my engines.
The typhoon is now up for sale. I'm asking for £1,500 as it is pictured or £1,000 with a std a/c 125cc engine and exhaust so it's legal for...
No longer for sale. cheers.
The std would work ok, just up jet a little. A gear kit would be advisable so you don't over rev it on the 125 gearing.
It's a 180 at the moment, i'll be selling it with a std exhuast and original 125 a/c engine as per the log book, the 180cc and pm pipe will be...
