The UK's biggest automatic scooter forum.
Separate names with a comma.
That's what everyone want's to know!
Dare i say it but I'm getting old now! Mmm ss50 on my 16th birthday, riding round aimlessly until the early hours, GREAT!!.
I to have been riding since i as about 5y/o Honda c 50's (to many to mention) Honda ss 50 first road bike 81" Honda cb 250 " 250 superdream...
BHP is the key, the Bugatti vyron makes 1001 bhp, it uses 250 bhp to get to 200 mph then the rest of the 750 bhp to get it to 250 mph,...
If you want a cheap n cheerful no frill's slow work horse there fine, if you don't expect to much from it ride it gently they do work, 120mpg is...
The early engines had smaller flywheels on the crank so as you say, no after market crank. Yes it's the hole engine that you want, the rolling nut...
No it won't fit, it will foul on the fan cowling and the silencer will hit the petrol tap. It's not good to cut away the fan cowling as some...
Your typhoon is quiet old now and spares hard to find, I'm not 100% about the crank but if you do have trouble then just fit a later engine. It's...
It's the kids thrashing them to death on cheap Tesco 2t oil, a 172 kit will be fine if used properly, warmed up like any 2t engine should be. I to...
My advice would be to buy a new std pipe, most s/h are crap, invest in a new one.
Ebay!
Take it back to where you bought it from, it should for more than 2 days.
Yes the water pump seals play up but are easy to change without stripping the engine, you don't need to go electric water pump, you'll need a full...
I think any chinese 125 flywheel fan will fit (gy6 engine) there should be loads on ebay!
There is a headlight set on ebay "photon" light set, it's 55w main and dip and small enough to fit with some modding. The only problem is if the...
Make sure it's shitbusting tight and fit the castle cap and split pin.
Bullshite! As the stig say's it's of very little weight so not an issue, plus he will brake the kickstart as it meant to be used in emergency...
I'll put some pictures up of my typhoon, it uses the same set up, i just cut all the rotten frame out and welded a new piece in. Easy.
Try another thick washer, or maybe you need a new hub or shaft or both.
Changing the seals and nylon bushes is a real arse of a job, and if the stantions are pitted just change them!
