The UK's biggest automatic scooter forum.
Separate names with a comma.
Use a rattle gun to take front pulley off. You will need a variator locking tool and torque wrench to tighten it up. 75Nm.
The best way I've found is a rattle gun, don't use it to tighten the nut up!
I use pipe grips, swan neck pliers, whatever you want to call them. When you refit new filter, fill it with new oil (5-40) fully synthetic engine...
Sounds to me like mixture setting, probably a bit rich low/mid range.
It's 24 mm, don't over tighten when you refit it!
Welcome to the world of 2 wheels, I've only been riding for 31 years on the road and still love it and ride nearly every day and love every second...
Check the woodruff keyway in both the crank and flywheel and the taper faces, if it's all ok then put it back on and torque it up, about 40Nm or...
Get yourself a pm59 and cut it up to fit, I did it to fit my typhoon.
Yes!
What scooter is it? Check the choke unit to make sure it's working.
The pm55 would probably fit, as you said the 59 will hit the body work. My " as new " quality chromed less than 150 miles old, only £200 p+p pm55...
Welcome to the world of scootering. Your now a 3rd class citizen and deserve all you get, it's your job to get out of other vehicles way, give...
You must be doing something wrong to do that, if you do need a better quality crank then buy new not second hand. Top racing or malossi!
About a 179cc.
Start by changing the plug, cdi, even the stator plate if you think it's ignition.
I cut my 59 in half and rotated the the rear outwards, always was a problem. You could also pack out the hanging bracket, I also removed the...
Yes 172 barrel/55mm crank.Porting has nothing to do with cc. Bore x stroke = cc, porting only aids flow in/out of the engine.
Hi all, I'm looking at 70cc kit for a project and would like some input on which one to get? It's either the DR or NGF iron kit or the Doppler s7r...
Headlight wont work until it's running. Forget about the mot, that means nothing, try a new spark plug and there might be a knack of starting it.
It could be the cdi/immobiliser and if it is then it's about £250 for a new one. Malossi make a replacement cdi for the et4 and other 4t scooters...
