The UK's biggest automatic scooter forum.
Separate names with a comma.
There m6 thread, thread two long bolts in them and make up a cross beam over the end of the crank like a beam puller.
If your unsure use a genuine Yamaha belt.
It won't hurt to much to richen the oil a little, the 180 runner has a 90 main jet as std so you could try a 92 ish? I alway's like to run a...
Has it cured the problem?
? coil/ht (high tension) lead/plug cap/plug.?
Get yourself a silent bush/scissor joint just like the runner/typhoon set up and do it it exactly the same so it's right. There's lots of people...
Probably seized it up, take the top end off to inspect it.
I first put a runner engine in the yellow typhoon in 99-2000 ish, had in about 9 years then sold it to a lad in Nottingham. He spent a LOAD of...
Do you intend just to bodge the engine in like most people do or fit it properly?
I did that 14 years ago, look on the site for threads on it.[ATTACH][ATTACH][ATTACH]These are my typhoons that I've done over the years. I...
Choke sticking on? Vacuum tap faulty letting petrol into inlet manifold? Blocked air filter?
A blown bulb and adjust the screw on the horn.
Flat battery?
You'll know if the main jet is too big as it will cough, fart, cut out when on full throttle!
Put a picture up of your caliper.
As far as I'm aware no typhoon 125 was ever fitted with a dellorto carb, the mikuni work's perfect on a std 125 typhoon, my typhoon I sold the...
There is no set amount, you have to adjust it so it work's with your set up.
If your caliper has two bolts through the pads and these have corroded in then you'll have next to no chance of getting them out, you'll have to...
Get yourself a set of digital scales of the bay (£10), a set of std rollers and using a pair of mole grip's lightly grip the rollers, drill the...
The std manufactured rollers I find the best, malossi/after market rollers are to soft and wear out to quickly!
