The UK's biggest automatic scooter forum.
Separate names with a comma.
Is the "little cogged wheel" on the flywheel side? If so it could be the one way starter clutch, they brake up and the springs collapse.
I don't think you'll get much more with a new belt n rollers, these are restricted in the CDI to stop them over reving and blowing up!
You'll need to check the plug colour to see if it's running rich or not.
You might need to try a few more roller weight's to find out what work's for you, are you big boned or 7 stone wringing wet? Trying different...
Give us a clue to what scooter you have, I've had a Vodka n Relentless and my spider scenes are not up to much at the moment!
The only real difference in the pipes is the down pipe routing.
The mounting will be the same, having repaired fork's many years ago, I would not entertain doing it again, by the time you've bought...
Most any Piaggio 50cc scooter pipe will fit, Buy new fork's as most s/h will be no better than your's, a new set will be approx £180.
That's the one!
Probably no reply's to this but I'm after a NRG Mc2-3 nrg L/C, must have a v5 and legit, does'nt need tax, mot or even run but in fair condition...
Very nice scubabiker, you'd loose my house and garden on your land, my fully equipped workshop:rolleyes: (shed) is 12'x6'!
You need a rolling nut typhoon 125/Aprilia sr 125 rolling nut engine (with caliper lugs), these are the same cases as a L/C runner with out the...
Read about it on the site your ordering it from, if it's the usual site then there is a shoot out on most pipes available on the market.
Most nuts/bolts all over need removing, copper slipping, carbs usualy need adjusting, valve clearance to tight.
This type of scooter needs a thorough PDI and building properly, various things need looking at and adjusting before riding it!
You'll find it at the back of the engine case near to the rear wheel axle, right at the very end of the case.
Your 180 sp must have been very special as there's not many Runners that would do 100+mph, was it a 38hp £2000+ PSN engined Runner!
We have a moddest 3 bed semi and nearly mortgage free!
The forks are a crap design and cheaply made. I personally won't mess around trying to repair knackered rusty fork's, just buy a new set of...
How long do you think you'll keep it before you get fed up with it and sell it due to the vibration due to not fitting the engine properly with...
