The UK's biggest automatic scooter forum.
Separate names with a comma.
I spoke to the supplier, he said there is nothing wrong with the carb, he asked me to send it back so that he can try it on another Aerox, he says...
K 1200 S, Its a BMW........the people who gave you the Bubble car [media]
Mark!.......I knew you would ask :) No actually, I was in the midst of a pizza delivery with the box strapped down on the back, that's why he...
Dont you believe him? well I do, cos it only just kept up with my Aerox when we raced together just last week, ;)
yes, agreed, but it might be more difficult than to say it.
no, from a shop on line, not auction either, there is nothing to say what make the carb is, but its advertised as "all Dellorto PHBG parts...
I told the supplier about the problems a few times, the last time I spoke with him he said that I could send it back and he would "work out the...
this Motoforce carb was recommended to me by the supplier, to go with all of the other things I bought from him, as a matched set, since this...
Ok,. so the 21mm carb is just too big.
if I put the original cab back on, the engine runs fine, would that not mean that it is the new carb which is causing the problem.
are you saying that there is a problem with the carb,
the revs are all over the place, I set the idle and it changes after I rev it up a bit, the mixture screw works at its best, when it is...
so what is the answer? is the only option now to discard this carb for a smaller one.
these 4 pictures above are with the float set at manufacturers spec, with the float at 16mm from the body when closed
it looks like the bottom of the metal arm, does the upward pushing of the needle, Not the two prong part which seams to be there only to pull the...
The picture shows the bottom of the carb, with no hole in the floats metal arm for the needle jet [ATTACH]
Ok, I understand
This was a very good test, It verified that the needle works and seals, whilst blowing my brains out, thank you for the offer, I reset the...
1. No there isn't, no hole 2. I agree, but this is the right way
I'm about to give up, I bought a new carb, and then a set of idle jets, and then a set of Main jets, to cure the problems with the new carb,...
