The UK's biggest automatic scooter forum.
Separate names with a comma.
Try using a hot air gun to heat the pipe and reform it into place.
Check tyre pressures, I'd run about 17psi front and 24-25 psi rear.
Mate! Or fu*king twat in my case!
Me! (steve is my real name, Marsh is my nic name)
Just give it a good service before you start riding it and keep it maintained.
Box.
No more to be said.
Youtube!
Yes, that's the kit, and guess what? they don't show you how the joint is made!! I'd love one of these kit's but the wife say's NO!
The union fall's out, make sure it's in tight. as for the gearbox, you need to have a look inside.
Gearbox making the noise. As for the popping, check the petrol pump pipe union on the l/h side of engine case just under the inlet manifold.
Mr Merlin, you are on the right track and very close! (In box me if you figure it out :D) Mr Stevep, I'm leaving the engine in it's original...
What makes you say that?
If it has the caliper lugs then yes it can,
Yes, measure the typhoon steering stem, cut it off about half way down, cut vx fork's and reweld using a solid steel bar to join them, make sure...
Close but no cigar, I used that joint and gave Dave that very same splined coupling, It did'nt work for me in a 250 and definitely did'nt work on...
If I did that everyone would be building one!;)
The 1st pic is most likely to be the secondary air system pipe (air box to exhaust) 2nd is an oil trap on the airbox, as it has a breather off the...
If it has the caliper lugs then yes it can, you'll need a wiring loom/silent block/ joint, re register it to fit it all to do it properly or are...
You don't have to block the holes off, just leave them. Minorconfused doe's know his stuff and I'm not going to argue as I've never tried changing...
