The UK's biggest automatic scooter forum.
Separate names with a comma.
Have a look in the hand book or look on the net for oil grade for the model, 5w/40 or 10w/40.
Definitely change the oil, it depend's on what scooter you have to what grade oil you use.
I personally cut the pin off with an angle grinder! As you say you'll need the hose and master cylinder. When I did a conversion years ago I used...
I have wheels blasted n powder coated for £30 a go!
It's a rolling nut engine I take it?
The 125cc Honda Pantheon scooter had a boost bottle fitted as std and would eat a 2t 125cc runner any day of the week!
Getting back to the first question, boost bottles do work but not so well on an auto. Honda, yamaha and probably Suzuki fitted boost bottles to...
Valve clearance? check/reset to 0.04"-0.05".
The Malossi 172 head is a higher compression so will improve performance on the 180cc.
While turning the engine over on the electric start, gently wind the throttle on until it goes.
Balance.
Bird.
It's behind the front panel, on the frame down tube.
6mm Dellorto jets fit.
The typhoon 125/80cc have 2 petrol tanks, one under the seat and one in the nose r/h side connected by a large bore pipe. The jet's are 6mm.
Yes the relay is up the spout, the contacts are burnt, or water ingress, just fit a new one.
On a std typhoon with Mikuni carb, it has a 86 main jet, that plug look's about right for a typhoon, it could use a 88 with the exhaust. Have you...
Crap in the carb, main jet blocked, filter material missing, pumpjet not working, diaphram split?
Flat battery? relay?. Check valve clearane, mixture setting. Is it all std ?
If Chinese scooters are used for what they where made for ie, cheap mean's of getting to work then there fine, it's kids thrashing them to death,...
