The UK's biggest automatic scooter forum.
Separate names with a comma.
If your planning on removing the pipes off the carb, then just join them together but don't block them off!
The pipes from header tank/head are the thermostat by-pass/ carb heater. Leave well alone and don't block them off. There maybe a resrictor in the...
I suppose your right, 11cm is a little short to make up! :(
What get's me is adds saying "car forces sale", "son bought a car so no longer need's scooter" whatever!! NO, NO, NO. :mad:.
I never run a squish lower than 0.8mm on an L/C engine and about 1.0mm on A/C.
If ever I have this problem, I rotate the speedo drive round a a few degree's to accommodate the cable length, shorter or longer, you need to cut...
I've repaired the circuit board by soldering in bits of wire, I might have a new set of clock's for a runner, there in kph but you could change...
Valve clearance is an issue on a lot of chinese motors, way to tight, set them at 0.04" and 0.05" and see how it goe's.
Put the std airbox on, it work's perfect!
A summers evening just as the weather starts to cool down and get's a bit moist/ duey, on a road leaving a built up area into the country lane and...
Yes, I used them once on one of my typhoons, (don't ask) there crap, shine very little or no light on the road, have no beam pattern and are crap,...
It may have been caused by a to tight a squish, hitting the head? the base gasket was a touch on the thin side? I would clean it up, new rings and...
Women.
Have you got the belly panel? If so is it in good nik?
It won't be any different to most of the chinese 50's, put up a picture of it and let us have a look.
The tsab wont stop the crank breaking, it's used to help stop the engine case from breaking, a common ish issue on Piaggio/Gilera engines.
As you said, there are std Aprilias for more money than your's, people want std scooters that havn't been messed with so I think you need to sort...
Chinesescooterpartsonline.
[ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH] Just a little update on the twin, the second pick-up now mounted/timed...
Sound's pretty normal to me, most gearboxes whine when wheel is turned.is the intermediate gear on the input shaft on the same way it left...
